| auszookers.com https://auszookers.com/forum/ |
|
| Cannot start after roll over!! https://auszookers.com/forum/viewtopic.php?f=5&t=49472 |
Page 1 of 1 |
| Author: | lukezook [ Wed Mar 04, 2015 5:16 pm ] |
| Post subject: | Cannot start after roll over!! |
Hey all, I have just purchased a Sierra with mk3 gti motor not running, the guy rolled it over and got it towed home, has not started since. Things I have checked- It runs on start ya bastard, so it not spark or cam angle/crank angle sensor. tested Ecu all inputs and outputs are as meant to be, exept no injector output voltage. it looks like a ECU problem as I noticed the battery was not tied down and the hood lining is aluminium sheeting stuck down with a tar like glue and has burned the top of it. Does anybody have any input as im about to chase down a ECU but could do with some advice.. Cheers in advance. |
|
| Author: | Scrawny [ Wed Mar 04, 2015 7:58 pm ] |
| Post subject: | Re: Cannot start after roll over!! |
Take the top off the ECU and have a look for burnt connections in there. If it's fried then you could get it repaired or just replace |
|
| Author: | lukezook [ Thu Mar 05, 2015 4:37 am ] |
| Post subject: | Re: Cannot start after roll over!! |
I will whip it off today and check, cheers |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|