| auszookers.com https://auszookers.com/forum/ |
|
| SQ series, CV joint boots https://auszookers.com/forum/viewtopic.php?f=5&t=49575 |
Page 1 of 1 |
| Author: | fordem [ Mon Mar 16, 2015 9:39 pm ] |
| Post subject: | SQ series, CV joint boots |
First the question - is there a difference between the inner & outer CV joint boots? I have on a shelf here, a bag containing two used (but useable) CJ joint boots, along with unused circlips, retaining straps, grease, etc., based on paint markings (drips of anti corrosive paint from when I painted the front cross member) I assumed these were inner CV boots, I am also supposed to have a new boot, which I cannot find (and which I no doubt will find as soon as I have replaced the punctured outer), so I ordered an outer boot kit, and visually, all three of the boots I have appear identical. The kit part numbers are different because the contents of the kits are different - the circlips are different - are the boots themselves different? |
|
| Author: | Built4thrashing [ Thu Mar 19, 2015 8:30 pm ] |
| Post subject: | Re: SQ series, CV joint boots |
outer boot is different. Its longer as it needs to handle more angle. I use universal ones from the local Auto shop. Only about $10 each. Just trip them to the correct size and away ya go. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|