| auszookers.com https://auszookers.com/forum/ |
|
| 2014 suzuki snorkel https://auszookers.com/forum/viewtopic.php?f=5&t=49589 |
Page 1 of 1 |
| Author: | kingy [ Wed Mar 18, 2015 7:19 am ] |
| Post subject: | 2014 suzuki snorkel |
i would like to know if there is any where i can get one. every one i have look at say to suit pre face lift. thanks andrew |
|
| Author: | Gwagensteve [ Wed Mar 18, 2015 7:20 am ] |
| Post subject: | Re: 2014 suzuki snorkel |
Might be able to help more if you specify the model. |
|
| Author: | Jezza86 [ Wed Mar 18, 2015 7:30 am ] |
| Post subject: | Re: 2014 suzuki snorkel |
im guessing a 2014 jimny giving the evidence on screen. jimnybits short snorkels might be ok. they dont come all the way down the fender |
|
| Author: | kingy [ Thu Mar 19, 2015 7:30 am ] |
| Post subject: | Re: 2014 suzuki snorkel |
sorry it is a 2014 jimny |
|
| Author: | hex_me [ Thu Apr 02, 2015 8:23 am ] |
| Post subject: | Re: 2014 suzuki snorkel |
Just replied to another thread about this yesterday. I've also got a 2014 Jimny and have just recently had a Safari Snorkel fitted, when choosing I ran into the same issue, all models only had compatibility up to the 2011 model. BUT the Safari can be fitted. Under the bonnet everything fits just fine, all that had to be done externally was to have a small bracket made up that is attached to the snorkel / car body where the snorkel comes up the side of the windscreen. Here's a link to some pics of mine: http://imgur.com/a/gyEb4 The bracket on mine is just 3mm aluminium. The only thing I've noticed is I get a little vibration when I initially accelerate hard (as in pedal to the floor) as its sucking harder. I might try putting a piece of foam / rubber underneath the bracket where it contacts with the body, otherwise maybe consider a steel bracket, might be a bit sturdier. Not sure what state you're in. I'm in Melbourne and this done at Piranha out in Boronia, these guys are little pricey, but seem to know what they're doing. Hope that helps. Andrew |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|