This is my injector u can see the part number195500-4500 but the colour is not blue unless im colour blind......
| auszookers.com https://auszookers.com/forum/ |
|
| injector question https://auszookers.com/forum/viewtopic.php?f=5&t=49592 |
Page 1 of 1 |
| Author: | modzook [ Wed Mar 18, 2015 8:12 pm ] |
| Post subject: | injector question |
Hi guys i have a spare set of injectors kicking round and thought id throw em in the zook, only thing is i have no idea if they are larger or not. part numbers are as follows. Spares: INP-470 (176cc i think) currently installed: 195500-4500 Anyone have any info? Thanks in advance. dave |
|
| Author: | mnemonix [ Wed Mar 18, 2015 9:05 pm ] |
| Post subject: | Re: injector question |
INP-470 is the stock g16b injector. High impedance (14ohm), beige in colour, Nikki brand and 172cc @ 44psi. 195500-4500 are typically used in mazda b6. High impedance (14ohm, blue in colour, denso brand and are 260cc @ 44psi. I See you're running a turbo g16b. The injectors currently in use should be good up to ~10psi, but I'd be upgrading before you reach that point. |
|
| Author: | Samurai81 [ Thu Mar 19, 2015 10:07 am ] |
| Post subject: | Re: injector question |
Being lazy here Mmnemonix, but I dont suppose you know the details for the injector in the throttle body single point system in the G16A? Steve. |
|
| Author: | mnemonix [ Thu Mar 19, 2015 11:25 am ] |
| Post subject: | Re: injector question |
Nope, never worked with them sorry. |
|
| Author: | Samurai81 [ Thu Mar 19, 2015 6:31 pm ] |
| Post subject: | Re: injector question |
Worth a try. Someone might know. I should carry a spare |
|
| Author: | modzook [ Thu Mar 19, 2015 6:55 pm ] |
| Post subject: | Re: injector question |
mnemonix wrote: INP-470 is the stock g16b injector. High impedance (14ohm), beige in colour, Nikki brand and 172cc @ 44psi. 195500-4500 are typically used in mazda b6. High impedance (14ohm, blue in colour, denso brand and are 260cc @ 44psi. I See you're running a turbo g16b. The injectors currently in use should be good up to ~10psi, but I'd be upgrading before you reach that point. Sweet as thanks mate thats the info i needed anyone want some spare stock injectors lol the denso ones are almost at their limit hence why i was thinking of going something bigger. I wont be needing more than 8psi as the zook goes like all hell allready no point in stressing it more than i need, by far the best mod iv done to the zook though. Thanks again for your help. dave |
|
| Author: | modzook [ Thu Mar 19, 2015 6:59 pm ] |
| Post subject: | Re: injector question |
mnemonix wrote: 195500-4500 are typically used in mazda b6. High impedance (14ohm, blue in colour, denso brand and are 260cc @ 44psi. just stuck my head in the engine bay and my 195500-4500's are pink........ is there a difference if its a different colour?? |
|
| Author: | modzook [ Thu Mar 19, 2015 8:49 pm ] |
| Post subject: | Re: injector question |
This is my injector u can see the part number195500-4500 but the colour is not blue unless im colour blind......
|
|
| Author: | Blkfxx [ Thu Mar 19, 2015 9:24 pm ] |
| Post subject: | Re: injector question |
Maybe just blind? To me those injectors say 195500-2400 |
|
| Author: | modzook [ Thu Mar 19, 2015 10:00 pm ] |
| Post subject: | Re: injector question |
Hahahahahahaha yep dyslexic much........... i wrote it down wrong on a plank of wood lol idiot....... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|