andrew wrote:
It starts butvthen idles at 2000rpm as soon as the choke comes off it dies below about
1500
1500
G'day , thats exactly what my wife suzuki is doing - what was the fix ?
| auszookers.com https://auszookers.com/forum/ |
|
| idle jet location https://auszookers.com/forum/viewtopic.php?f=5&t=49623 |
Page 1 of 1 |
| Author: | andrew [ Mon Mar 23, 2015 8:02 am ] |
| Post subject: | idle jet location |
Hi guys ive pulled my carby down twice trying to fix it can any one tell The location of the idle jet pic would be helpful id at all possible. Thanks in advance. 92 suzuki sierra aisin carby |
|
| Author: | testos_tyrone [ Mon Mar 23, 2015 7:59 pm ] |
| Post subject: | Re: idle jet location |
What issue do you have, if it's a rough idle try taking out the mixture screw and carby clean/ blow air into the hole, common to gum up, just take note of how many turns in to seat it before you pull it out |
|
| Author: | andrew [ Tue Mar 24, 2015 6:18 am ] |
| Post subject: | Re: idle jet location |
It starts butvthen idles at 2000rpm as soon as the choke comes off it dies below about 1500 |
|
| Author: | andrew [ Tue Mar 24, 2015 7:38 am ] |
| Post subject: | Re: idle jet location |
Thats the non tamper one and tge bottom of near the rocker cover huh ? |
|
| Author: | mathuranatha [ Wed Nov 20, 2024 5:30 pm ] |
| Post subject: | Re: idle jet location |
andrew wrote: It starts butvthen idles at 2000rpm as soon as the choke comes off it dies below about 1500 G'day , thats exactly what my wife suzuki is doing - what was the fix ?
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|