| auszookers.com https://auszookers.com/forum/ |
|
| Easiest way to change 04 GV wheel studs https://auszookers.com/forum/viewtopic.php?f=5&t=49701 |
Page 1 of 1 |
| Author: | Sco-tie [ Tue Mar 31, 2015 7:28 pm ] |
| Post subject: | Easiest way to change 04 GV wheel studs |
Whats the easiest way to go about the changing them front and rear? Rear looks like need to remove the axle. Front looks like need to remove the whole knuckle... |
|
| Author: | sezed [ Wed Apr 01, 2015 7:38 pm ] |
| Post subject: | Re: Easiest way to change 04 GV wheel studs |
I think you'll need to do a full dissassembly. The front hub appears to need the hub to be clear of the knuckle to get the bolts out otherwise the abs ring and the brake guard are in the way:  The rear may be easier, you will need to partially remove the axle to clear the bolts at the back 
|
|
| Author: | Sco-tie [ Wed Apr 01, 2015 9:29 pm ] |
| Post subject: | Re: Easiest way to change 04 GV wheel studs |
Mmm yes that's what I thought. Thanks for the pics! Maybe I'll get a new knuckle to play with |
|
| Author: | NomadGV03 [ Wed Apr 01, 2015 9:44 pm ] |
| Post subject: | Re: Easiest way to change 04 GV wheel studs |
The front I don't think is possible as the ABS disc is a pressed in piece which prevents the studs from being removed. The rear is possible (I've read somewhere but forgot where) without removing the whole axle but have not yet done this. |
|
| Author: | Sco-tie [ Wed Apr 01, 2015 10:02 pm ] |
| Post subject: | Re: Easiest way to change 04 GV wheel studs |
The front would have to be possible otherwise what do you do with a broken stud... |
|
| Author: | NomadGV03 [ Wed Apr 01, 2015 10:11 pm ] |
| Post subject: | Re: Easiest way to change 04 GV wheel studs |
Sco-tie wrote: The front would have to be possible otherwise what do you do with a broken stud... I am not sure on that as that was going through my head aswell. My hubs didn't have the ABS disc when I bought the aftermarket ones to make it possible to change the studs as there was a choice of ABS or non ABS hub for the same price and that was the answer that was given to me - Ebay |
|
| Author: | Sco-tie [ Wed Apr 01, 2015 10:15 pm ] |
| Post subject: | Re: Easiest way to change 04 GV wheel studs |
Hmm tricky... I'll keep looking into it before I take it all apart |
|
| Author: | NomadGV03 [ Wed Apr 01, 2015 10:23 pm ] |
| Post subject: | Re: Easiest way to change 04 GV wheel studs |
As you can see the disc is a pressed in piece. Looks like there is a possibility to remove this but a slight bend in it will screw your ABS sensor up. |
|
| Author: | NomadGV03 [ Thu Apr 09, 2015 9:40 pm ] |
| Post subject: | Re: Easiest way to change 04 GV wheel studs |
How did you go changing the studs over if you could? |
|
| Author: | Sco-tie [ Thu Apr 09, 2015 10:14 pm ] |
| Post subject: | Re: Easiest way to change 04 GV wheel studs |
Haven't got to it yet, Gonna wait till i have the lux cv kit and rear disc conversion so that I don't need everything apart multiple times. My mechanic say the ABS should just press off and on again |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|