| auszookers.com https://auszookers.com/forum/ |
|
| spanner set to work on zooks https://auszookers.com/forum/viewtopic.php?f=5&t=49737 |
Page 1 of 1 |
| Author: | itms.zook [ Sun Apr 05, 2015 10:54 am ] |
| Post subject: | spanner set to work on zooks |
[*]hi all I would like some advice on a good spanner set to replace my mismatched set. All my tools are pretty much kincrome. I have been looking at sp tools 25 piece kincrome 25 piece toolpro 24 piece and cresent set. I am open minded on brands. Any hekp is much appreciated |
|
| Author: | ninjamoses [ Sun Apr 05, 2015 11:53 am ] |
| Post subject: | Re: spanner set to work on zooks |
I've got the ToolPro 25 pce metric set (6mm - 32mm) hanging on the garage wall. Highly rate it, so good having the larger sizes on hand for those few times you need them. Wait till SCA have a sale on and you can pick it up cheap cheap (think I got it for $50 from memory, absolute bargain at that price). |
|
| Author: | striker99 [ Mon Apr 06, 2015 12:28 pm ] |
| Post subject: | Re: spanner set to work on zooks |
I have one of those $50 sca spanner sets, has metric and imperial, in a roll up bag that fits nicely in the rear drawers. |
|
| Author: | Rossco [ Mon Apr 06, 2015 1:04 pm ] |
| Post subject: | Re: spanner set to work on zooks |
I use the Stanley ratcheting spanner set from SCA. Highly rate them, they can be had on special for $80. |
|
| Author: | got_bar_work [ Fri Apr 10, 2015 6:35 am ] |
| Post subject: | Re: spanner set to work on zooks |
Get a big bahco Socket set. Best tool kit on the market. Its got 1/2 drive sockets 1/4 in drive sockets I think 6-19mm spanners Allen key Phillips and flat blades Only thing else I have needed on a vit was a bigger spanner to undo the power steering lines. |
|
| Author: | LJ50 [ Fri Apr 10, 2015 11:21 am ] |
| Post subject: | Re: spanner set to work on zooks |
Get on these mate, they come out the same factory as all the other high quality brands but are only sold online I believe meaning there is not massive overheads to cover http://www.nuketools.com.au/ |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|