auszookers.com
https://auszookers.com/forum/

Head jobs???
https://auszookers.com/forum/viewtopic.php?f=5&t=4993		 Page 1 of 1
Author:  twitchy [ Thu May 28, 2009 11:06 am ]
Post subject:  Head jobs???
Will a 16valve head go onto the G16A block? if so are the inlet manifolds the same at the ports??? :please:
Author:  Damo [ Thu May 28, 2009 11:49 am ]
Post subject:  Re: Head jobs???
twitchy wrote:
Will a 16valve head go onto the G16A block?

Yes

twitchy wrote:
if so are the inlet manifolds the same at the ports??? :please:

No
Author:  Hybrid [ Thu May 28, 2009 1:03 pm ]
Post subject:  Re: Head jobs???
Damo wrote:
twitchy wrote:
if so are the inlet manifolds the same at the ports??? :please:

No


How good would that be. There'd be plenty of g16B efi manifolds bolted to 8 valve g16a's then.
Author:  hutch [ Thu May 28, 2009 11:39 pm ]
Post subject:  Re: Head jobs???
:P
oh damn... u got my attention
:roll:
Author:  twitchy [ Fri May 29, 2009 1:09 am ]
Post subject:  Re: Head jobs???
Just means I will have to modify a fool injection manifold then I guess. Now then, who does the best alloy work around Brisneyland??
Author:  Hybrid [ Fri May 29, 2009 12:22 pm ]
Post subject:  Re: Head jobs???
Tell me when you find out. I've got the injector bosses for modifying my 8 valve inlet manifold. I was considering epoxying them in. The bosses are threaded though so I was thinking I could prob drill and tap the manifold so that they sit firm in the right position then just drop them off for tig work. Maybe someone on the forum does tig welding through work?
Author:  royce [ Fri May 29, 2009 12:34 pm ]
Post subject:  Re: Head jobs???
twitchy wrote:
Just means I will have to modify a fool injection manifold then I guess. Now then, who does the best alloy work around Brisneyland??


even though I am immensly confused by what you are trying to do if you need to mod an injection manifold for a 16 valve head, Richard at A.R.E is the gun, you will pay for it though and you will wait for it and he will tell you to bugger off if he thinks your wasting his time

www.are.com.au
Author:  twitchy [ Fri May 29, 2009 4:36 pm ]
Post subject:  Re: Head jobs???
It's all right Royce I to am confused & it's my project.......... :rofl: :rofl:


Is $250 a good price for a 16valve head with inlet & exhaust manifolds??
Author:  royce [ Fri May 29, 2009 4:48 pm ]
Post subject:  Re: Head jobs???
providing it isnt cracked I would think so

and is it swift or vitara?
Author:  twitchy [ Fri May 29, 2009 5:11 pm ]
Post subject:  Re: Head jobs???
it's a Vitara head.
Author:  Hybrid [ Fri May 29, 2009 6:01 pm ]
Post subject:  Re: Head jobs???
Sounds real good. Is that with injectors, fuel rail, throttle body with the throttle position sensor and all that stuff?
Author:  twitchy [ Fri May 29, 2009 8:15 pm ]
Post subject:  Re: Head jobs???
Nope, don't need that stuff!!! :goodjob:
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/