| auszookers.com https://auszookers.com/forum/ |
|
| 04 build jimmy diff plug https://auszookers.com/forum/viewtopic.php?f=5&t=49965 |
Page 1 of 1 |
| Author: | garryc [ Wed Apr 29, 2015 4:16 pm ] |
| Post subject: | 04 build jimmy diff plug |
Hey guys, I want to check my rear dif oil level. Can anyone tell me what size square socket I need to buy that will fit. I have a multi point tool but cannot get enough pull on it to undo it. Looks like I will need the correct socket and breaker bar. Also is the a gasket on the filler plug and if so what size as I want to get the bits I need while I am in town tomorrow Thanks in advance Garry |
|
| Author: | J--A--C--K [ Wed Apr 29, 2015 7:11 pm ] |
| Post subject: | Re: 04 build jimmy diff plug |
Pretty sure it's 10mm , I've allways used a 3/8 socket wrench but it is dodgy and you need to be carful not to round it out. |
|
| Author: | henno [ Thu Apr 30, 2015 6:05 am ] |
| Post subject: | Re: 04 build jimmy diff plug |
10mm square. Most people use a 3/8th socket but in saying that, most diff plugs are flogged out as a result. You can buy the tools on ebay, although mine came as part of a diff and gearbox plug socket set which is a handy thing to have in the shed anyway. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|