auszookers.com :: View topic - Anyone tried to import the parts to the 4sport jimny brazil

I'm from Brazil, and the 4work model is the same as the 4sport model, except for the rubber interior they added.

The tire size is actually 215/75r15 bf goodrich mud km2. The one with huge tires on the video was the DDS model that has been discontinued in 2011. It was first made trough a joint between Suzuki and DDS (dds.ind.br/) so they can market the off road appeal of the car, as standard Jimny don't look that capable to most people.

The DDS version actually had big tires (235/85r16) from factory along with a new suspension set, new ring and pinion set (later ones), snorkel, reinforced recovery points, skid plate, among other things.

The 4work and 4sport model use the wheel arches, bumpers, recovery points and snorkel previously designed by DDS, but the suspension is stock and they added a 1" body lift (same as in the HR version, also discontinued). The 215/75r15 tires are also optional (about a thousand US$ more)

To buy such bumpers and wheel arches, however, is still very expensive. I have made a quote at dealership to put those on mine and it's easier to buy brand new 4sport Jimny. When this parts became more popular, them this transformation maybe can make sense. And it will happen, because it's selling well.

Here you can check offered versions: www.suzukiveiculos.com.br/jimny-ver4-2. ... drQNyC86m4

Any other info that i can provide to you guys, please ask.

Author:	242stickman [ Thu Apr 30, 2015 1:40 pm ]
Post subject:	Anyone tried to import the parts to the 4sport jimny brazil
Pretty much like the subject says. Has any one ever tried to import the parts to make there own jimny 4sport, Like the ones they sell in brazil ? Or does anyone have a parts book for the 4sports, So i can get the item codes ? Look forward to hearing back!

Author:	Rhinoman [ Fri May 01, 2015 4:30 am ]
Post subject:	Re: Anyone tried to import the parts to the 4sport jimny bra
South American models tend not to be on the Suzuki 'worldwide' database. I copied this from the Bigjimny forum: Quote: I'm from Brazil, and the 4work model is the same as the 4sport model, except for the rubber interior they added. The tire size is actually 215/75r15 bf goodrich mud km2. The one with huge tires on the video was the DDS model that has been discontinued in 2011. It was first made trough a joint between Suzuki and DDS (dds.ind.br/) so they can market the off road appeal of the car, as standard Jimny don't look that capable to most people. The DDS version actually had big tires (235/85r16) from factory along with a new suspension set, new ring and pinion set (later ones), snorkel, reinforced recovery points, skid plate, among other things. The 4work and 4sport model use the wheel arches, bumpers, recovery points and snorkel previously designed by DDS, but the suspension is stock and they added a 1" body lift (same as in the HR version, also discontinued). The 215/75r15 tires are also optional (about a thousand US$ more) To buy such bumpers and wheel arches, however, is still very expensive. I have made a quote at dealership to put those on mine and it's easier to buy brand new 4sport Jimny. When this parts became more popular, them this transformation maybe can make sense. And it will happen, because it's selling well. Here you can check offered versions: www.suzukiveiculos.com.br/jimny-ver4-2. ... drQNyC86m4 Any other info that i can provide to you guys, please ask.

Author:	242stickman [ Fri May 01, 2015 11:57 am ]
Post subject:	Re: Anyone tried to import the parts to the 4sport jimny bra
Thanks for that its helpful to find out a little more about them! Looks like it might be hard to get hold of the parts, Sadly

Author:	Rhinoman [ Fri May 01, 2015 5:21 pm ]
Post subject:	Re: Anyone tried to import the parts to the 4sport jimny bra
The DDS website isn't up to much.

Author:	privatepablo [ Thu May 07, 2015 10:20 pm ]
Post subject:	Re: Anyone tried to import the parts to the 4sport jimny bra
Why can't Suzuki bring those models over here to Australia?

auszookers.com https://auszookers.com/forum/

Anyone tried to import the parts to the 4sport jimny brazil https://auszookers.com/forum/viewtopic.php?f=5&t=49972	Page 1 of 1

Author:	vet 180 [ Fri May 08, 2015 3:31 pm ]
Post subject:	Re: Anyone tried to import the parts to the 4sport jimny bra
Wife is Brazilian and I have worked with Suzuki parts departments world wide before. I think there is a very good chance I could get these parts

Author:	privatepablo [ Sat May 09, 2015 10:17 am ]
Post subject:	Re: Anyone tried to import the parts to the 4sport jimny bra
Does anyone know if the 4sport wheel arches are the same or wider than the ones on the Australian jimny?

Author:	Rhinoman [ Sat May 09, 2015 9:00 pm ]
Post subject:	Re: Anyone tried to import the parts to the 4sport jimny bra
They don't look any wider to me.

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/