| auszookers.com https://auszookers.com/forum/ |
|
| Sierra/vitara clutch interchangability https://auszookers.com/forum/viewtopic.php?f=5&t=50021 |
Page 1 of 1 |
| Author: | mrw82 [ Tue May 05, 2015 7:37 pm ] |
| Post subject: | Sierra/vitara clutch interchangability |
Might be a silly question, but can a 1.3 clutch/flywheel be used in a vitara? I know it can bolt up to the engine (as per a g16 into sierra conversion, to run the Sierra box), but unsure if the vitara gearbox would mate up to the G13 clutch. Can anyone confirm or deny? Reason I ask is I might need to replace the clutch in a vitara, but it'll only have a short life 6-12 months max, before getting dropped into a sierra. Don't want to have to buy 2 clutches if one will do the job. |
|
| Author: | Bulldog 61 [ Wed May 06, 2015 4:44 pm ] |
| Post subject: | Re: Sierra/vitara clutch interchangability |
mrw82 wrote: Might be a silly question, but can a 1.3 clutch/flywheel be used in a vitara? I know it can bolt up to the engine (as per a g16 into sierra conversion, to run the Sierra box), but unsure if the vitara gearbox would mate up to the G13 clutch. Can anyone confirm or deny? Reason I ask is I might need to replace the clutch in a vitara, but it'll only have a short life 6-12 months max, before getting dropped into a sierra. Don't want to have to buy 2 clutches if one will do the job. Mate get onto Bretski on here, Im buying a 1.6 off him to do the swap and I don't need the clutch pressure plate or flywheel, if its ok might save you buying a new one. |
|
| Author: | tanshi [ Wed May 06, 2015 4:46 pm ] |
| Post subject: | Re: Sierra/vitara clutch interchangability |
mrw82 wrote: Might be a silly question, but can a 1.3 clutch/flywheel be used in a vitara? I know it can bolt up to the engine (as per a g16 into sierra conversion, to run the Sierra box), but unsure if the vitara gearbox would mate up to the G13 clutch. Can anyone confirm or deny? Reason I ask is I might need to replace the clutch in a vitara, but it'll only have a short life 6-12 months max, before getting dropped into a sierra. Don't want to have to buy 2 clutches if one will do the job. ask Tim, there was a brand new clutch on the engine I just sold him that he wont be using |
|
| Author: | Scrawny [ Wed May 06, 2015 6:15 pm ] |
| Post subject: | Re: Sierra/vitara clutch interchangability |
Pretty sure input shafts are different. Exedy website should confirm that |
|
| Author: | mrw82 [ Wed May 06, 2015 8:08 pm ] |
| Post subject: | Re: Sierra/vitara clutch interchangability |
tanshi wrote: mrw82 wrote: Might be a silly question, but can a 1.3 clutch/flywheel be used in a vitara? I know it can bolt up to the engine (as per a g16 into sierra conversion, to run the Sierra box), but unsure if the vitara gearbox would mate up to the G13 clutch. Can anyone confirm or deny? Reason I ask is I might need to replace the clutch in a vitara, but it'll only have a short life 6-12 months max, before getting dropped into a sierra. Don't want to have to buy 2 clutches if one will do the job. ask Tim, there was a brand new clutch on the engine I just sold him that he wont be using Already onto it. Thanks Darren. Keeps the vitara alive for a bit longer while it's needed. Now the fun job of installing it... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|