| auszookers.com https://auszookers.com/forum/ |
|
| G16b jimny, jimny loom, aw4 wiring! https://auszookers.com/forum/viewtopic.php?f=5&t=50039 |
Page 1 of 1 |
| Author: | Cambell [ Thu May 07, 2015 7:02 pm ] |
| Post subject: | G16b jimny, jimny loom, aw4 wiring! |
Alright guys, My situation is, I'm currently running a g16b baleno engine with jimny loom and ecu, The jimny auto is past its used by date. My solution is to fit an aw4 auto. I have the aw4, torque converter, flex plate, tcm and wiring I need some help with the wiring side of things. The jimny being an auto has all the inputs a need in a nice bundle for the jimny tcm. Is it as simple as pluging the wires in the right holes in the aw4 tcm. I have both the jimny and vit wiring diagrams and have started to mark out with I need and don't need on both sides. Any help would be great. Cam |
|
| Author: | Gwagensteve [ Fri May 08, 2015 6:56 am ] |
| Post subject: | Re: G16b jimny, jimny loom, aw4 wiring! |
I believe so. I have driven a g16b engined sierra running jimny injection and an AW-4. Patch the appropriate wires across to the Vitara TCC and you should be all good. |
|
| Author: | DAZOOK [ Sat Sep 12, 2015 10:41 am ] |
| Post subject: | Re: G16b jimny, jimny loom, aw4 wiring! |
Any updates? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|