auszookers.com
https://auszookers.com/forum/

GV free wheeling hubs??
https://auszookers.com/forum/viewtopic.php?f=5&t=5013		 Page 1 of 1
Author:  steak_knife [ Sat May 30, 2009 1:24 pm ]
Post subject:  GV free wheeling hubs??
Would any of you happen to know if free wheeling hubs can be used of another manufacturer ?? I know sierra`s are to small ( that`s the hub`s, not the drivers) & I don`t want to import a set from the states.
Loving this site, top mark`s to all !!!
Author:  Mugwui [ Sat May 30, 2009 2:35 pm ]
Post subject:  Re: GV free wheeling hubs??
Vitara Hubs fit. Thats what I've got on mine.
Author:  steak_knife [ Sat May 30, 2009 3:34 pm ]
Post subject:  Re: GV free wheeling hubs??
I was thinking thay may, just didn`t want to buy some to find thay wonn`t fit.
Thanx for that.
Author:  PhillT [ Sat May 30, 2009 6:34 pm ]
Post subject:  Re: GV free wheeling hubs??
I've got AVMs on my '98 GV.
Author:  gravity_powered [ Sat May 30, 2009 6:47 pm ]
Post subject:  Re: GV free wheeling hubs??
I have it on good authority from Bruce that Coily sierra Hubs fit as well.
Author:  atari4x4 [ Sat May 30, 2009 11:01 pm ]
Post subject:  Re: GV free wheeling hubs??
vitara hubs are a straight bolt on
Author:  Bruce [ Sat May 30, 2009 11:08 pm ]
Post subject:  Re: GV free wheeling hubs??
gravity_powered wrote:
I have it on good authority from Bruce that Coily sierra Hubs fit as well.


100% correct 8)
Author:  steak_knife [ Sun May 31, 2009 12:56 pm ]
Post subject:  Re: GV free wheeling hubs??
Thanx for that, I`ve had a vibration from 80kmh up, ( only to the posted speed limit that is ) it has gotten worse since the lift kit & have narrowed it down to the front shaft`s all way`s spinning. Either way thay are cheap 2nd hand!
All hail the wrecking yards!!!!
Author:  gravity_powered [ Fri Jun 12, 2009 11:10 pm ]
Post subject:  Re: GV free wheeling hubs??
I fitted coily sierra hubs to mine today, it was a piece of piss!

Only thing to note was to make sure you get the Sierra retaining bolts with the hubs as the GV ones are different.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/