| auszookers.com https://auszookers.com/forum/ |
|
| "Aussie Carb" conversion question https://auszookers.com/forum/viewtopic.php?f=5&t=50207 |
Page 1 of 1 |
| Author: | AckerDackerly [ Thu May 28, 2015 10:55 pm ] |
| Post subject: | "Aussie Carb" conversion question |
Exactly what is it? One of our best vendors in the USofA is considering marketing it here and is wondering what the good and not-so-good features are on the this setup. Yes, it is Myron at Zuiksoffroad.com... You can respond here, at the ZOR facebook page or in a post/PM at Zuksoffroad.com I would like to know too! |
|
| Author: | Marko_SJ [ Thu May 28, 2015 11:00 pm ] |
| Post subject: | Re: "Aussie Carb" conversion question |
AckerDackerly wrote: Exactly what is it? One of our best vendors in the USofA is considering marketing it here and is wondering what the good and not-so-good features are on the this setup. Yes, it is Myron at Zuiksoffroad.com... You can respond here, at the ZOR facebook page or in a post/PM at Zuksoffroad.com I would like to know too! You mean whacking an Aisin carb onto a Suzuki fitted with a Hitachi carb? |
|
| Author: | AckerDackerly [ Thu May 28, 2015 11:55 pm ] |
| Post subject: | Re: "Aussie Carb" conversion question |
I am not sure - my description is exactly what MY posted ... I will attempt to get some more info. |
|
| Author: | madmacca [ Thu May 28, 2015 11:58 pm ] |
| Post subject: | Re: "Aussie Carb" conversion question |
there are some other Carbies out there that are a direct bolt on , no emission controls at all though I bought a couple off ebay a while back , still to really test it all properly , helps when a) the zook is running (changed motor) and b) I am in the same country as said zook 
|
|
| Author: | sideways [ Sat May 30, 2015 12:14 am ] |
| Post subject: | Re: "Aussie Carb" conversion question |
The Aus spec 1.3l Sierra carb is really quite troublesome and is terrible on angles. I don't see why anyone would bother fitting one. |
|
| Author: | madmacca [ Sat May 30, 2015 3:34 am ] |
| Post subject: | Re: "Aussie Carb" conversion question |
I should say the Carbies that I have got are not off a Suzuki also Sierra carbies from what I have experienced mostly have issues due to wear , which allow Vacuum leaks from New they were actually not that bad on Angles , just that was a few years of abuse ago
|
|
| Author: | MrRocky [ Sat May 30, 2015 1:23 pm ] |
| Post subject: | Re: "Aussie Carb" conversion question |
New or rebuilt sierra carbs perform well You can hardly expect them to behave like a new unit after 200,000kms and 30 years 4x4ing. All things considered they hold up quite well |
|
| Author: | AckerDackerly [ Sat May 30, 2015 2:15 pm ] |
| Post subject: | Re: "Aussie Carb" conversion question |
Thanks all for your replies! The message that I am hearing is that there is not - to anyone's knowledge - an actual product or common modification called an "aussie carb". It isn't what I was expecting to hear, but it is useful information nonetheless! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|