| auszookers.com https://auszookers.com/forum/ |
|
| back firing under load, Help. Opinnions https://auszookers.com/forum/viewtopic.php?f=5&t=50319 |
Page 1 of 1 |
| Author: | burto [ Fri Jun 12, 2015 3:41 pm ] |
| Post subject: | back firing under load, Help. Opinnions |
hey guy my cars back firing under load or high revs? its a MG410WT with a g16a, it was running fine then one day i turned it on in the driveway and it had a miss and ran abit rough, changed all the plugs ( old ones black and fouled) ran sweet again for awhile, i took it for a drive and it randomly started back firing and carrying on and not really going anywhere, i took it home and its backfiring out the carby and the exhaust under high revs or load, i marked the dissy and changed it and when i retarded the timing it idled abit smoother but still back fires under load? Anyone have any thoughts or had this problem before? maybe the timing belt has jumped a tooth? ( not sure if it would run if it did) |
|
| Author: | SuziBlu [ Fri Jun 12, 2015 7:22 pm ] |
| Post subject: | Re: back firing under load, Help. Opinnions |
Id be looking at the dizzy itself, sounds like it has failed. |
|
| Author: | burto [ Sat Jun 13, 2015 3:38 pm ] |
| Post subject: | Re: back firing under load, Help. Opinnions |
are 1.3 dissys the ssame? cheers |
|
| Author: | burto [ Sat Jun 13, 2015 4:59 pm ] |
| Post subject: | Re: back firing under load, Help. Opinnions |
also i pulled a lead off while running( had abit of a miss) and it zapped me? are leads meant to zap? i thought they were insulated? |
|
| Author: | MrRocky [ Sat Jun 13, 2015 11:06 pm ] |
| Post subject: | Re: back firing under load, Help. Opinnions |
Lead will zap the hell out of u Bolt on dizzy loose ? |
|
| Author: | cairns27 [ Sun Jun 14, 2015 4:42 am ] |
| Post subject: | Re: back firing under load, Help. Opinnions |
I had this once, the nut on the end of the cam had come loose, and flogged out the woodruff key, is your bottom pulley tight? bye |
|
| Author: | burto [ Sun Jun 14, 2015 8:08 am ] |
| Post subject: | Re: back firing under load, Help. Opinnions |
MrRocky wrote: Lead will zap the hell out of u Bolt on dizzy loose ? nah bolt is tight  cairns27 wrote: I had this once, the nut on the end of the cam had come loose, and flogged out the woodruff key, is your bottom pulley tight? bye im not sure, will double check all that today. cheers guys |
|
| Author: | burto [ Sun Jun 14, 2015 9:48 am ] |
| Post subject: | Re: back firing under load, Help. Opinnions |
any one have a picture of there camgear/ keyway? my keyway isnt all the way out to the bolt it sits in 1-2mm? |
|
| Author: | murcod [ Sun Jun 14, 2015 4:55 pm ] |
| Post subject: | Re: back firing under load, Help. Opinnions |
A car I used to own did this when the ignition lead on one cylinder was intermittent. (For some reason the same cylinder would regularly have the ignition lead fail.) It would be okay until under load. It probably isn't your issue, but might be worthwhile checking. |
|
| Author: | burto [ Sun Jun 14, 2015 5:43 pm ] |
| Post subject: | Re: back firing under load, Help. Opinnions |
UPDATE i have a g16a in my sierra ( just pulled it out of an old sierra and put it in my new toy) it ran fine before i pulled it ( full day fourbying the day before) and ran fine when i first put it in, the other day i drove out my driveway and it was fine, within 50m it started coughing and spluttering under load so i turned around and went home, when i got back it started coughing and spluttering (well seems to be breaking down under load) even when just reving it in the driveway in nuetral, i replaced the fuel in the tank, blew out the line and put new filters in the line and the fuel is clean, i changed plugs ( they were black black) and also changed the leads. also changed the oil and filter. tried different rotor button and caps ( no difference, all almost new) checked the timing belt and the keyways and they were all perfect, i also noticed it didnt have an earth from block to body so i added one of them, also compression tested them and they were all dead even. starting to lean towards coil? unless my alternator has shat itself? any idea's? cheers |
|
| Author: | burto [ Sun Jun 14, 2015 5:44 pm ] |
| Post subject: | Re: back firing under load, Help. Opinnions |
battery positive terminal is also noticeably warm? |
|
| Author: | burto [ Mon Jun 15, 2015 8:50 pm ] |
| Post subject: | Re: back firing under load, Help. Opinnions |
Replaced everything,rusty water for coolant, fuel, fuel filters, plugs leads dissy cap and rotor button, gt40r coil and it was still stuffed, got annoyed at it and thought id take it for a drive and gave it a flogging and it came good, think it might of been the choke, stupid g13 carby and wax choke |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|