| auszookers.com https://auszookers.com/forum/ |
|
| sierra gearbox removal ???? https://auszookers.com/forum/viewtopic.php?f=5&t=50361 |
Page 1 of 1 |
| Author: | yareckonillgetupthat [ Thu Jun 18, 2015 4:49 pm ] |
| Post subject: | sierra gearbox removal ???? |
hey, is there some sort of trick to getting a sierra gear box out without removing engine ?? I've tried every angle its starting to piss me off was thinking maybe remove driveshaft front diff to t case but id prefer not to any tips any one ?? cheers its a 1.3 L |
|
| Author: | tanshi [ Thu Jun 18, 2015 4:52 pm ] |
| Post subject: | Re: sierra gearbox removal ???? |
yep. small notch in the cross member |
|
| Author: | yareckonillgetupthat [ Thu Jun 18, 2015 5:05 pm ] |
| Post subject: | Re: sierra gearbox removal ???? |
thanks mate any pics? |
|
| Author: | want33s [ Thu Jun 18, 2015 6:23 pm ] |
| Post subject: | Re: sierra gearbox removal ???? |
Slice 10mm off the front of the pad the gearbox mount sits on. |
|
| Author: | cairns27 [ Thu Jun 18, 2015 7:35 pm ] |
| Post subject: | Re: sierra gearbox removal ???? |
I jacked the back of the engine up, undo the exhaust pipe under car and tie the part from the engine to the chassis, with a bit of wriggling and twisting the box will come out the left side of the car..........I got this from somewhere on this site. bye |
|
| Author: | shiv [ Mon Jun 22, 2015 8:49 pm ] |
| Post subject: | Re: sierra gearbox removal ???? |
Took mine out few weeks ago. Got it out with just a twist and pushing the rear of it to the passenger side. You have to take off the selector |
|
| Author: | whincup [ Mon Jun 22, 2015 9:59 pm ] |
| Post subject: | Re: sierra gearbox removal ???? |
with the driveshafts removed its really easy. few extra minutes work saves a lot of stuffing around |
|
| Author: | shiv [ Tue Jun 23, 2015 8:45 am ] |
| Post subject: | Re: sierra gearbox removal ???? |
ah yes I should of said I took the transfer and drive shafts out |
|
| Author: | yareckonillgetupthat [ Sat Jul 04, 2015 6:04 pm ] |
| Post subject: | Re: sierra gearbox removal ???? |
done the notch and it came out sweet all back together thanks for the advice, only prob is the clutch pedal is soft as, so easy to stall I'm guessing new clutch cable , it feels like it needs bleeding but its cable ?? wtf |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|