hi, ive got a Holden Scurry/suzui carry with the F10A 4 cylinder motor in it. wanting to know if there is any place in Australia (if possible) that sells the electronic ignition set ups
Thanks heaps.
| auszookers.com https://auszookers.com/forum/ |
|
| hi, im new, wanting info on an elec dizzy https://auszookers.com/forum/viewtopic.php?f=5&t=50367 |
Page 1 of 1 |
| Author: | slimer13b [ Fri Jun 19, 2015 7:17 pm ] |
| Post subject: | hi, im new, wanting info on an elec dizzy |
hi, ive got a Holden Scurry/suzui carry with the F10A 4 cylinder motor in it. wanting to know if there is any place in Australia (if possible) that sells the electronic ignition set ups Thanks heaps.
|
|
| Author: | Gwagensteve [ Fri Jun 19, 2015 8:19 pm ] |
| Post subject: | Re: hi, im new, wanting info on an elec dizzy |
I threw a 1.3 (g13b) distributor on mine, which run electronic ignition. Never got it fully sorted but others have. |
|
| Author: | slimer13b [ Fri Jun 19, 2015 9:50 pm ] |
| Post subject: | Re: hi, im new, wanting info on an elec dizzy |
So do the G13B ones bolt straight in? |
|
| Author: | Gwagensteve [ Fri Jun 19, 2015 10:11 pm ] |
| Post subject: | Re: hi, im new, wanting info on an elec dizzy |
Did on my f10a, but mine was in a sierra. |
|
| Author: | slimer13b [ Sat Jun 20, 2015 12:38 am ] |
| Post subject: | Re: hi, im new, wanting info on an elec dizzy |
So no reason why it shouldn't fit mine yeh? |
|
| Author: | Gwagensteve [ Sat Jun 20, 2015 10:22 am ] |
| Post subject: | Re: hi, im new, wanting info on an elec dizzy |
No idea- I have no experience with the carry version of the F10a |
|
| Author: | slimer13b [ Sat Jun 20, 2015 8:18 pm ] |
| Post subject: | Re: hi, im new, wanting info on an elec dizzy |
arent all F10A engines the same? |
|
| Author: | Gwagensteve [ Sat Jun 20, 2015 8:22 pm ] |
| Post subject: | Re: hi, im new, wanting info on an elec dizzy |
Maybe- pretty sure I've seen an f10a with the distributor facing the opposite way to the sierra version. Steve. |
|
| Author: | ZUZUKI [ Mon Jun 22, 2015 12:04 am ] |
| Post subject: | Re: hi, im new, wanting info on an elec dizzy |
I'm assuming it currently has points, as otherwise you wouldn't be asking about a kit. I just fitted a kit at Piranha Off Road to a 1.0litre points distributor, easy, bolt in kit, costs $320. I work there - not saying buy our kit, but we do sell one to suit. An alternative, is that the F10A Maruti versions in the 1990s ran an electronic ignition distributor - might be able to either fit those bits into your body (if the body is mounted differently in a van) or just fit the whole thing + module. Cheers, Michael V. |
|
| Author: | slimer13b [ Mon Jun 22, 2015 12:40 am ] |
| Post subject: | Re: hi, im new, wanting info on an elec dizzy |
yeh mine is points set up https://www.google.com.au/search?q=suzu ... B557%3B538 |
|
| Author: | fordem [ Mon Jun 22, 2015 1:34 am ] |
| Post subject: | Re: hi, im new, wanting info on an elec dizzy |
slimer13b wrote: arent all F10A engines the same? No. I believe the block & head are identical, but, the remainder may differ significantly depending on the vehicle. A Sierra (or Maruti) will have the engine mounted, more or less, vertically, but the Carry vans have it tilted at a significant angle, under the front seat. Oil pans are different, intake & exhaust manifolding is different, as Steve has pointed out, the distributors are mounted differently - who knows what else is different. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|
