auszookers.com
https://auszookers.com/forum/

KPD 4X4 Wheel spacers, Anyone running them on thier zooks?
https://auszookers.com/forum/viewtopic.php?f=5&t=50432		 Page 1 of 1
Author:  ZookFan [ Tue Jun 30, 2015 5:24 pm ]
Post subject:  KPD 4X4 Wheel spacers, Anyone running them on thier zooks?
Hi Guys has anyone used Danks 1 inch Wheel Spacers?



http://www.kpd4x4.com/1-inch-25mm-wheel ... ki-sierra/
Author:  jono165 [ Tue Jun 30, 2015 7:40 pm ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
Yeah I had a set to run my xl7 wheels. They're really well made, I've never compared them to anything else but they did the job and I never had a wheel fall off.
Author:  MrRocky [ Tue Jun 30, 2015 8:20 pm ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
If there actually round then there better than the rims i got off him
Author:  fergy [ Tue Jun 30, 2015 10:34 pm ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
:rofl: :rofl: :rofl: :rofl: Nothing a good balance won't fit mr rocky
Author:  dank [ Wed Jul 01, 2015 11:58 am ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
MrRocky wrote:
If there actually round then there better than the rims i got off him


:shocked:
Author:  just_cruizin [ Wed Jul 01, 2015 9:59 pm ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
Sounds like a customer whinging on a forum rather than having the conversation with the supplier.
Author:  5ierra [ Thu Jul 02, 2015 10:53 am ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
just_cruizin wrote:
Sounds like a customer whinging on a forum rather than having the conversation with the supplier.


You're wrong, that doesn't ever happen on Auszookers.
Author:  MrRocky [ Thu Jul 02, 2015 10:56 am ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
Actually tried to resolve the issue Privately
Apparently mine were the only ones that were oval shaped
Nice way to waste $1500
Author:  mnemonix [ Thu Jul 02, 2015 2:12 pm ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
Mine are still perfect to this day. Stop crying over spilt milk, take it elsewhere as it doesn't relate to the product in question.
Author:  MrRocky [ Thu Jul 02, 2015 2:22 pm ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
Kind of does relate
Found him good to deal with until there was a problem then very difficult.
considering they probably come from the same thai machine shop id say its quite relevant
Author:  just_cruizin [ Thu Jul 02, 2015 6:23 pm ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
I apologise mrRocky I didn't know the history, I have never had an issue with his product personally
Author:  dank [ Fri Jul 03, 2015 10:22 am ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
:|

These spacers are from a different supplier.
Author:  ZookFan [ Fri Jul 03, 2015 11:47 am ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
jono165 wrote:
Yeah I had a set to run my xl7 wheels. They're really well made, I've never compared them to anything else but they did the job and I never had a wheel fall off.


How long did you run them for? Lots and LOTS of people are going to FROWN at this But I am going to take a CHANCE and run Dank's Wheel Spacers on my LJ :wink: :wink:
Author:  bally [ Fri Jul 03, 2015 11:53 am ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
never had an issue with any of dans gear. he resolves and queries promptly and very well.....
Author:  jdk81 [ Fri Jul 03, 2015 6:32 pm ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
Ive had a wheel come off due to wheel spacers.

Didnt notice due to corrugations on the way home from 3 days of 4x4/camping, and fully laden. And bang a 3 wheeler.
Luckily it was a rear.
The drum backing plate chewed out.
Took ages to find the run away wheel, and jack the car up etc.
Took a couple of hours to get it back and running and i stopped and checked everything every 10 minutes.

They were promptly removed, when i got home.
Author:  Scrawny [ Fri Jul 03, 2015 6:47 pm ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
Just wheel or wheel and spacer? Did you find the cause?
Author:  ZookFan [ Fri Jul 03, 2015 6:59 pm ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
Dank has sold heaps of them and not one has failed, Yet!
Author:  jdk81 [ Fri Jul 03, 2015 7:22 pm ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
It was a spacer from lror.

The spacer tore off the drum, the spacer was still bolted to the wheel.
The wheel nuts somehow loosened a little and then flogged the aluminium. The wheel nuts and studs then ripped out of the alloy.
Author:  henno [ Fri Jul 03, 2015 7:27 pm ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
Wheel spacers scare me.

Then again I am getting old and sensible and stuffs.
Author:  ZookFan [ Fri Jul 03, 2015 7:36 pm ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
jdk81 wrote:
It was a spacer from lror.

The spacer tore off the drum, the spacer was still bolted to the wheel.
The wheel nuts somehow loosened a little and then flogged the aluminium. The wheel nuts and studs then ripped out of the alloy.



I see 8O
Author:  jono165 [ Fri Jul 03, 2015 8:21 pm ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
I had my spacers on for a few months. They didn't see many kms. They survived an adventure tour fine though. I always intended on buying wheels with the correct back spacing it was just a way to use wheels I had.
Author:  NomadGV03 [ Wed Jul 08, 2015 8:58 pm ]
Post subject:  Re: KPD 4X4 Wheel spacers, Anyone running them on thier zook
I am using bolt on wheel spacers made-to-fit my PCD etc and have held up to everything very well!
I had to get extended wheel studs and fit them then shave them down to the right length to make them flush and haven't had one issue with fitment, rattling whilst the handling of Burnouts, launching over sand dunes hard cornering etc.
Mine are billet alloy. Loctite is recommended but also note that these aren't legal here in WA. Got mine for about $500. Danks look nice as mine are just the silver colour and stand out more which isn't the best when getting pulled over.
I found that with my lift, the spacers have helped my turning alot. Just easier to corner.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/