Yeah had a look, pretty simple swap
| auszookers.com https://auszookers.com/forum/ |
|
| G16a carby into 1.3 Sierra https://auszookers.com/forum/viewtopic.php?f=5&t=50448 |
Page 1 of 1 |
| Author: | Heathejj97 [ Wed Jul 01, 2015 7:49 pm ] |
| Post subject: | G16a carby into 1.3 Sierra |
Just picked up a low in vitara engine! G16a carby, runs mint as, the an is to put it into my 1.3l Sierra carby (g13ba), what do I need to know? I assume it all bolts up to the standard engine mounts? And will all the stock radiator hoses etc and wiring fit up? Assuming I'll be using the stock 1.6 clutch with the 1.3 gearbox right? Anything I need to know? |
|
| Author: | Gwagensteve [ Wed Jul 01, 2015 7:52 pm ] |
| Post subject: | Re: G16a carby into 1.3 Sierra |
Get searching. Have a look at BenT kit in the vendor area. |
|
| Author: | Heathejj97 [ Thu Jul 02, 2015 1:06 am ] |
| Post subject: | Re: G16a carby into 1.3 Sierra |
Yeah had a look, pretty simple swap
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|