bad, aren't they know for being the weakest link.... at least with the Asians you can steal bits from slowlux's etc.......
I have a pair of auto free wheeling hubs you can have, then you don't even have to get out to go 4wding?
| auszookers.com https://auszookers.com/forum/ |
|
| AVM manual hubs https://auszookers.com/forum/viewtopic.php?f=5&t=5051 |
Page 1 of 1 |
| Author: | Chop [ Wed Jun 03, 2009 7:41 pm ] |
| Post subject: | AVM manual hubs |
AVM manual hubs, good or bad? chop |
|
| Author: | atari4x4 [ Wed Jun 03, 2009 7:59 pm ] |
| Post subject: | Re: AVM manual hubs |
bad, aren't they know for being the weakest link.... at least with the Asians you can steal bits from slowlux's etc....... I have a pair of auto free wheeling hubs you can have, then you don't even have to get out to go 4wding?
|
|
| Author: | kenn [ Wed Jun 03, 2009 9:28 pm ] |
| Post subject: | Re: AVM manual hubs |
You want the old steel case ones, there ace 
|
|
| Author: | Bruce [ Wed Jun 03, 2009 10:00 pm ] |
| Post subject: | Re: AVM manual hubs |
Leave them alone. JMO. Asians are the ONLY way to go mate |
|
| Author: | Chop [ Wed Jun 03, 2009 10:15 pm ] |
| Post subject: | Re: AVM manual hubs |
Yeah, just thought i'd ask. mine are a bit rustic lol. And i was watching the tassie dvd with 4wd monthly and the big V8 80 series had them on it. And thought if they were bad they wouldnt use them on something big, heavy and powerful like that. Chop |
|
| Author: | Gwagensteve [ Wed Jun 03, 2009 10:53 pm ] |
| Post subject: | Re: AVM manual hubs |
AVM's are junk. No, you wouldn't use them on something big and heavy, they'll just break. Aisin hubs are very strong - AFAIK there is no stronger alternative. Steve. |
|
| Author: | Bruce [ Wed Jun 03, 2009 11:07 pm ] |
| Post subject: | Re: AVM manual hubs |
Gwagensteve wrote: AVM's are junk.
No, you wouldn't use them on something big and heavy, they'll just break. Aisin hubs are very strong - AFAIK there is no stronger alternative. Steve. x2 mate 
|
|
| Author: | atari4x4 [ Wed Jun 03, 2009 11:08 pm ] |
| Post subject: | Re: AVM manual hubs |
just go down to u-steal it & rape a few 4wd's. As far as I could see most of the guts are the same... the only difference I could see were the different spline counts. |
|
| Author: | joeblow [ Wed Jun 03, 2009 11:57 pm ] |
| Post subject: | Re: AVM manual hubs |
early steel avm's are the way to go and far more reliable than aisins. the early avm's are a licensed version of the warn hub. as long as aisins are kept lubricated they will be fine, but the dial is so much nicer on an early avm. |
|
| Author: | Chop [ Thu Jun 04, 2009 12:42 am ] |
| Post subject: | Re: AVM manual hubs |
Thanks guys. Chop |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|