| auszookers.com https://auszookers.com/forum/ |
|
| Sierra: Fitting a larger scissor jack in the stock location? https://auszookers.com/forum/viewtopic.php?f=5&t=50533 |
Page 1 of 1 |
| Author: | alien [ Mon Jul 13, 2015 11:49 am ] |
| Post subject: | Sierra: Fitting a larger scissor jack in the stock location? |
Anyone done it? I've got a larger one but the footprint is bigger so it wont fit in the stock hoop thing. How have you modified yours to fit? |
|
| Author: | just_cruizin [ Mon Jul 13, 2015 12:45 pm ] |
| Post subject: | Re: Sierra: Fitting a larger scissor jack in the stock locat |
I think this is right up there with fitting a thicker sway bar |
|
| Author: | alien [ Mon Jul 13, 2015 12:50 pm ] |
| Post subject: | Re: Sierra: Fitting a larger scissor jack in the stock locat |
Not really... the stock jack is almost at full travel to lift a wheel from the diff housing at the moment. It's basically useless. I've inherited a jack from my grandfather's wrecked Rav4 which is far bigger and better suited to the height of my sierra. It's a very basic recovery tool but something worth having, and having functional. |
|
| Author: | Blkfxx [ Mon Jul 13, 2015 1:02 pm ] |
| Post subject: | Re: Sierra: Fitting a larger scissor jack in the stock locat |
Cut and weld the stock mount to fit your new one? |
|
| Author: | tanshi [ Mon Jul 13, 2015 1:07 pm ] |
| Post subject: | Re: Sierra: Fitting a larger scissor jack in the stock locat |
can steal the mount from the rav4 aswel? |
|
| Author: | alien [ Mon Jul 13, 2015 1:15 pm ] |
| Post subject: | Re: Sierra: Fitting a larger scissor jack in the stock locat |
blkfxx - that's what i was thinking, i was just wondering if anyone had a tidy solution for inspiration. tanshi - nope, it's gone. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|