| auszookers.com https://auszookers.com/forum/ |
|
| IAC valve pintil wound out https://auszookers.com/forum/viewtopic.php?f=5&t=50617 |
Page 1 of 1 |
| Author: | bobbrumby [ Fri Jul 24, 2015 2:14 pm ] |
| Post subject: | IAC valve pintil wound out |
I was cleaning my sisters idle air control valve on a h25 grand vitara, I took it apart and cleaned it but my down fall was when I had the soleniod off the valve body I plugged it into the connector then turned igntion to get it to move, now I cant reassemble with out getting the thread on the pintel shaft to engage more into the stepper motor. How do you get the motor to turn? Or have I f**cked it? |
|
| Author: | bobbrumby [ Fri Jul 24, 2015 2:41 pm ] |
| Post subject: | Re: IAC valve pintil wound out |
Dont worry got it sorted you just have some one hold the pintil in and then cycle the ignition, it gives up pushing it out and starts to pull it in. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|