sideways wrote:
The crank will physically fit but the stoke is 6mm shorter so you'd lose capacity and your compression ratio would be garbage.
Wow, Is there anything you don't know SIDEWAYS. Great stuff.
| auszookers.com https://auszookers.com/forum/ |
|
| Will a crankshaft from 800cc fit f10a 1 litre motor https://auszookers.com/forum/viewtopic.php?f=5&t=50757 |
Page 1 of 1 |
| Author: | davidraeburn [ Sun Aug 09, 2015 8:39 am ] |
| Post subject: | Will a crankshaft from 800cc fit f10a 1 litre motor |
I have a 1litre motor with a run bearing needing crank grind and also a good crank out of a 800cc stockman motor are these crankshafts interchangable.Thanks in anticipation. |
|
| Author: | sideways [ Sun Aug 09, 2015 10:32 am ] |
| Post subject: | Re: Will a crankshaft from 800cc fit f10a 1 litre motor |
The crank will physically fit but the stoke is 6mm shorter so you'd lose capacity and your compression ratio would be garbage. |
|
| Author: | davidraeburn [ Sun Aug 09, 2015 4:17 pm ] |
| Post subject: | Re: Will a crankshaft from 800cc fit f10a 1 litre motor |
Thanks for the info I really appreciate the help. |
|
| Author: | krat [ Sun Aug 09, 2015 9:33 pm ] |
| Post subject: | Re: Will a crankshaft from 800cc fit f10a 1 litre motor |
sideways wrote: The crank will physically fit but the stoke is 6mm shorter so you'd lose capacity and your compression ratio would be garbage. Wow, Is there anything you don't know SIDEWAYS. Great stuff.
|
|
| Author: | missmyljdaze [ Sun Aug 09, 2015 10:18 pm ] |
| Post subject: | Re: Will a crankshaft from 800cc fit f10a 1 litre motor |
sideways wrote: The crank will physically fit / your compression ratio would be garbage.  supercharged F10  stephen |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|