| auszookers.com https://auszookers.com/forum/ |
|
| Sierra ignition barrel https://auszookers.com/forum/viewtopic.php?f=5&t=50812 |
Page 1 of 1 |
| Author: | suzukikid [ Mon Aug 17, 2015 12:05 pm ] |
| Post subject: | Sierra ignition barrel |
I have lost misplaced my keys and have torn the joint apart! Are any other barrels the same? There are 4 wires going into the barrel is it as easy as 2 for accesories and 2 to start so I could just put in 2 switches? Thanks |
|
| Author: | suzukikid [ Mon Aug 17, 2015 3:10 pm ] |
| Post subject: | Re: Sierra ignition barrel |
Also is wt and nt the same? |
|
| Author: | Scrawny [ Mon Aug 17, 2015 3:28 pm ] |
| Post subject: | Re: Sierra ignition barrel |
Wires should be: -Permanent power TO switch -Accessories power FROM switch -Ignition power FROM switch -Start signal FROM switch If you jump a wire from permanent to ignition, then another from permanent to start it should fire into life. |
|
| Author: | suzukikid [ Mon Aug 17, 2015 4:25 pm ] |
| Post subject: | Re: Sierra ignition barrel |
I think I have sourced a barrel and door locks but if it falls through I will try work out some switches and push button start! I have heard nt and wt are different.... Is this true? |
|
| Author: | cairns27 [ Wed Aug 19, 2015 8:20 am ] |
| Post subject: | Re: Sierra ignition barrel |
The key number is on passenger side door lock, just get one cut Bye |
|
| Author: | suzukikid [ Wed Aug 19, 2015 4:21 pm ] |
| Post subject: | Re: Sierra ignition barrel |
What? Haha |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|