| auszookers.com https://auszookers.com/forum/ |
|
| Gearbox for 2.7l GV Manual https://auszookers.com/forum/viewtopic.php?f=5&t=50813 |
Page 1 of 1 |
| Author: | Marked [ Mon Aug 17, 2015 12:07 pm ] |
| Post subject: | Gearbox for 2.7l GV Manual |
Just about to buy a second hand manual box for my 2.7l GV. Mine has done 160,000 and is really noisy To get bearings replaced is $2300...and that does not include gears if it needs new ones of those. So Ive found one at a wreckers with 50,000 on it for $1300, $500 to get fitted. Anyone have an informed opinion on whether this is the best way to go? I am keeping the car, but the reality is my box has had a very hard life. |
|
| Author: | dougies_tx5turbo [ Mon Aug 17, 2015 8:57 pm ] |
| Post subject: | Re: Gearbox for 2.7l GV Manual |
Got one in brisbane for $120 has no tc is in good condition can come with a new exeedy clutch but i dropped the clutch plate but they are only about $90 or somewhere around that price to replace. Sorry to hijack your thread |
|
| Author: | Marked [ Mon Aug 17, 2015 9:28 pm ] |
| Post subject: | Re: Gearbox for 2.7l GV Manual |
Are you trying to tell me you bought a 2006 on Gearbox for a GV for $120? Because I dont believe that. Unless you bought it off a mate or something |
|
| Author: | dougies_tx5turbo [ Mon Aug 17, 2015 10:43 pm ] |
| Post subject: | Re: Gearbox for 2.7l GV Manual |
Sorry miss read your post thought I saw xl7 2.7 and I am selling gearbox out of a xl7 |
|
| Author: | watermouse [ Tue Aug 18, 2015 9:08 am ] |
| Post subject: | Re: Gearbox for 2.7l GV Manual |
Get more quotes for replacement bearings or a second hand box there may be better prices. You shouldn't need new gears. Gearbox values vary greatly depending on how hard you look for them. Small time, non specific wreckers and enthusiasts with old builds will part with them a lot cheaper than $1300 An XL7 box will bolt up to your engine but you will need to put the Tcase from yours on it if you go with Dougies. If you aren't handy to DIY that will but you back in the $$ though. Someone else may know if the output setup on the NGV 2.7 transfer is the same or different as the SQ series(??) |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|