| auszookers.com https://auszookers.com/forum/ |
|
| GV front coil correction spacers https://auszookers.com/forum/viewtopic.php?f=5&t=50831 |
Page 1 of 1 |
| Author: | nobes [ Wed Aug 19, 2015 8:08 am ] |
| Post subject: | GV front coil correction spacers |
Im looking for people that are running the front coil correction spacers on their GV, I know a few of you are. The coil correction spacers I have don't fit all the way In to the springs seat and I need to know if this is correct or not? Will the weight of the spring force the spacer all the way to where it is suppose to seat? |
|
| Author: | mudmav [ Thu Aug 20, 2015 7:02 pm ] |
| Post subject: | Re: GV front coil correction spacers |
Mine didn't fit properly either, just took them out tonight after having them in for 18 months. Unless you have a big lift they cause more problems than they fix in my opinion |
|
| Author: | nobes [ Fri Aug 21, 2015 8:33 pm ] |
| Post subject: | Re: GV front coil correction spacers |
What front springs where you running and how high a lift? I was hoping to use 3" springs in the rear and 2" in the front (jimnybits) coupled with the coil correctors. I've currently trimmed them but they still don't sit really well. How much would 3" front coils bow? Anyone else running 3" coils in the front and can comment on the spring bow? |
|
| Author: | mudmav [ Sat Aug 22, 2015 5:49 pm ] |
| Post subject: | Re: GV front coil correction spacers |
I was running jimnybits 2 inch springs with coil correctors and it was horrible! They're out now and drives really nice |
|
| Author: | nobes [ Sat Aug 22, 2015 7:28 pm ] |
| Post subject: | Re: GV front coil correction spacers |
So you're just running the jimnybits springs in the front and that's all now? |
|
| Author: | mudmav [ Sat Aug 22, 2015 10:06 pm ] |
| Post subject: | Re: GV front coil correction spacers |
Yep spot on |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|