| auszookers.com https://auszookers.com/forum/ |
|
| How do get anti theft bolts off from ignition barrel https://auszookers.com/forum/viewtopic.php?f=5&t=50841 |
Page 1 of 1 |
| Author: | suzukikid [ Thu Aug 20, 2015 6:13 am ] |
| Post subject: | How do get anti theft bolts off from ignition barrel |
As above what's the easiest way to get the anti theft bolts off from the bracket that holds the ignition barrel on? Cheers |
|
| Author: | Scrawny [ Thu Aug 20, 2015 7:36 am ] |
| Post subject: | Re: How do get anti theft bolts off from ignition barrel |
Hammer and cold chisel |
|
| Author: | tonyevans [ Thu Aug 20, 2015 8:24 am ] |
| Post subject: | Re: How do get anti theft bolts off from ignition barrel |
^^^ That's how I got mine off |
|
| Author: | cairns27 [ Thu Aug 20, 2015 9:26 am ] |
| Post subject: | Re: How do get anti theft bolts off from ignition barrel |
Ya didn't believe the key number is on the door lock????? bye |
|
| Author: | AckerDackerly [ Thu Aug 20, 2015 9:40 am ] |
| Post subject: | Re: How do get anti theft bolts off from ignition barrel |
cairns27 wrote: Ya didn't believe the key number is on the door lock????? bye  Point well taken!...although I purchased a Maruti ignition switch and door lockset ($80 US from Roadless Gear) because the previous owner seemed to have a problem with the existing switch... he installed a starter button in the tintop, then threw away the keys! |
|
| Author: | ozzycouch [ Thu Aug 20, 2015 10:23 am ] |
| Post subject: | Re: How do get anti theft bolts off from ignition barrel |
Vice grips |
|
| Author: | tonyevans [ Thu Aug 20, 2015 11:26 am ] |
| Post subject: | Re: How do get anti theft bolts off from ignition barrel |
ozzycouch wrote: Vice grips don't work as they are pyramid shape 
|
|
| Author: | ozzycouch [ Thu Aug 20, 2015 12:10 pm ] |
| Post subject: | Re: How do get anti theft bolts off from ignition barrel |
tonyevans wrote: don't work as they are pyramid shape You can grab them at the base as the metal is quite soft
|
|
| Author: | tonyevans [ Thu Aug 20, 2015 12:18 pm ] |
| Post subject: | Re: How do get anti theft bolts off from ignition barrel |
not the ones I took out |
|
| Author: | suzukikid [ Thu Aug 20, 2015 5:27 pm ] |
| Post subject: | Re: How do get anti theft bolts off from ignition barrel |
I didn't have a number on the barrel.... |
|
| Author: | cairns27 [ Thu Aug 20, 2015 5:55 pm ] |
| Post subject: | Re: How do get anti theft bolts off from ignition barrel |
It's just 4 small digits..I bought a couple of wrecks without keys over the years, and always been able to get keys cut..maybe it's on the drivers side door lock?? bye |
|
| Author: | suzukikid [ Thu Aug 20, 2015 9:41 pm ] |
| Post subject: | Re: How do get anti theft bolts off from ignition barrel |
I have pmed you mate |
|
| Author: | suzukikid [ Fri Aug 21, 2015 6:27 am ] |
| Post subject: | Re: How do get anti theft bolts off from ignition barrel |
Vice grips worked awsome!!!! The top bolt was woeful had to rip the speedo out to get to it... |
|
| Author: | BAZZOOK [ Fri Aug 21, 2015 7:44 am ] |
| Post subject: | Re: How do get anti theft bolts off from ignition barrel |
 THERE'S ALSO A SPECIALIST LOCKSMITH TOOL SHAPED LIKED A SCREWDRIVER WITH A HARDENED BLADE FOR THOSE ANTI THEFT SCREWS FOR NUMBER PLATES.. |
|
| Author: | 4x4xzook [ Fri Aug 21, 2015 10:23 am ] |
| Post subject: | Re: How do get anti theft bolts off from ignition barrel |
Vic grips worked a treat like nathan said... just a matter of getting it to the top bolt haha |
|
| Author: | frak [ Mon Aug 24, 2015 8:32 am ] |
| Post subject: | Re: How do get anti theft bolts off from ignition barrel |
+1 for the easy out bits. 1. Drill small hole 2. Cuck in the easy out withe the drill in reverse. Sent from my SM-G900I using Tapatalk |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|