| auszookers.com https://auszookers.com/forum/ |
|
| 1.6 8v carby engine into 1.3 carby sierra https://auszookers.com/forum/viewtopic.php?f=5&t=50864 |
Page 1 of 1 |
| Author: | Ben Cahill [ Mon Aug 24, 2015 7:28 am ] |
| Post subject: | 1.6 8v carby engine into 1.3 carby sierra |
Just had a question I havent been able to find the answer for. Im trying to make the conversion as simple as possible so is it possible to leave the 1.6 dizzy on and use the 1.3 intake manifold and carby on. The new engine is from a 1990 8v Carby vitara. Feel free to post links as I havent been able to find an answer anywhere. |
|
| Author: | Dec [ Sun Aug 30, 2015 7:52 pm ] |
| Post subject: | Re: 1.6 8v carby engine into 1.3 carby sierra |
Hey Ben, I run the vitara g16a 8v Carby engine in my Coily. I run the 1.6 dizzy, 1.6 intake manifold and my original g13ba carby and air intake. One thing you will run into is the g16 sits just higher so you can either body lift or simply space the bonnet up as i have done. Check out the second page of my build thread at the bottom for some photos. viewtopic.php?f=4&t=33311&hilit=dec&start=30 Cheers |
|
| Author: | Ben Cahill [ Mon Aug 31, 2015 11:47 pm ] |
| Post subject: | Re: 1.6 8v carby engine into 1.3 carby sierra |
Thanks for the reply, exactly what I was after. |
|
| Author: | Zook_Fan [ Tue Sep 01, 2015 12:04 pm ] |
| Post subject: | Re: 1.6 8v carby engine into 1.3 carby sierra |
While it does work you will get a performance gain by going up to the larger carby and air intake. The 1.3 intake really chokes a 1.6. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|