| auszookers.com https://auszookers.com/forum/ |
|
| Vehicle Dimensions https://auszookers.com/forum/viewtopic.php?f=5&t=50900 |
Page 1 of 1 |
| Author: | bibby [ Thu Aug 27, 2015 6:39 pm ] |
| Post subject: | Vehicle Dimensions |
Hey guys, I'm in desperate need of Vehicle measurements for a Holden Drover LWB UTE or a Suzuki Stockman LWB UTE, even just a normal sierra would probably do (around 85 model). If anyone has a PDF file with a photo of the vehicle and the dimensions i would be hugely appreciative, im mainly after the stock height but i need it on an official document. Why an official document? just search google and use the results you may be wondering. Its because it is for the MVR as i need to prove my vehicle is within 100mm of lift so i don't need TAC. With is being an old car it is not in there system and he said i need to get a official document with the overall vehicle height listed. (official, meaning from the manufacturer or a service manual not just some random bloke typing the height) If anyone has anything that would help, thanks heaps in advance. Sam |
|
| Author: | sideways [ Thu Aug 27, 2015 7:51 pm ] |
| Post subject: | Re: Vehicle Dimensions |
A while back I got some official documents off a NSW RTA website. They listed the stock distance between the bumpstops, the stock bumpstop height and the overall height of the vehicle. They also listed 16x6.00 as an optional tyre for SJ50/SJ51s which should help you out as they're taller than the FR78s (roughly 27.4x8) that most 1.3ls came with. There were ones for almost all models of Sierra, including ones that predate yours. I'd link you up but my internet is atrocious at the moment, I'd probably never find it. |
|
| Author: | bibby [ Thu Aug 27, 2015 9:52 pm ] |
| Post subject: | Re: Vehicle Dimensions |
Ill have a search |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|