| auszookers.com https://auszookers.com/forum/ |
|
| Lwb body mounts https://auszookers.com/forum/viewtopic.php?f=5&t=50914 |
Page 1 of 1 |
| Author: | suzukikid [ Sun Aug 30, 2015 7:52 pm ] |
| Post subject: | Lwb body mounts |
Hey all I have a swb body lift here and just wondering before I advertise it if lwb are the same? Do they have extra? Swb has the 6 bigger holes blocks and 4 with the smaller holes for the front and rear.... Cheers |
|
| Author: | Gwagensteve [ Sun Aug 30, 2015 7:58 pm ] |
| Post subject: | Re: Lwb body mounts |
All mounts are the same up until the load area. LWB style sides have two more bolted mounts. The two extra are not captive studs. Steve. |
|
| Author: | 4x4xzook [ Mon Aug 31, 2015 9:43 am ] |
| Post subject: | Re: Lwb body mounts |
can they be used to lift a lwb tray? |
|
| Author: | Gwagensteve [ Mon Aug 31, 2015 10:40 am ] |
| Post subject: | Re: Lwb body mounts |
lifting the tray just uses longer bolts and whatever you want to use as a spacer. There's no need to use a specific "body lift" spacer. However, the last thing I'd want to do is lift the tray of a sierra. the COG is too high already. Steve. |
|
| Author: | 4x4xzook [ Mon Aug 31, 2015 10:50 am ] |
| Post subject: | Re: Lwb body mounts |
Point taken. Thanks steve |
|
| Author: | suzukikid [ Mon Aug 31, 2015 5:50 pm ] |
| Post subject: | Re: Lwb body mounts |
Ok cheers! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|