[quote="lump_a_charcoal"]You just need a new shift sheet - $6 from most spares places.
X2 happend to mine last year $7 genuine problem solved..
And for that money , take spare.
| auszookers.com https://auszookers.com/forum/ |
|
| whos got twinsticks? https://auszookers.com/forum/viewtopic.php?f=5&t=5095 |
Page 1 of 1 |
| Author: | keechox [ Mon Jun 08, 2009 12:44 pm ] |
| Post subject: | whos got twinsticks? |
anyone have twin sticks in their sierra? im having problems shifting transfer and getting sick of pulling out the shifter to re adjust the levers. if you have them, do they work ok? are they worth it? cheers |
|
| Author: | 31zook [ Mon Jun 08, 2009 1:49 pm ] |
| Post subject: | Re: whos got twinsticks? |
Im thinking about making my own... look on pirate or Zukikrawlers, alot of them make there own and it doen't look super hard |
|
| Author: | lump_a_charcoal [ Mon Jun 08, 2009 2:45 pm ] |
| Post subject: | Re: whos got twinsticks? |
You just need a new shift sheet - $6 from most spares places. To do the twin stick mod you need to split the Tcase... |
|
| Author: | 31zook [ Mon Jun 08, 2009 3:09 pm ] |
| Post subject: | Re: whos got twinsticks? |
Why do you need to split the TCases? Afterpushing and spinning the holder the stick pulls out. (I did this about a year ago now so i could be wrong) but with a grinder and some steel i could make one up without having to split the TCase |
|
| Author: | lump_a_charcoal [ Mon Jun 08, 2009 3:23 pm ] |
| Post subject: | Re: whos got twinsticks? |
There is a detent (ball bearing) that needs to be removed... |
|
| Author: | kenn [ Mon Jun 08, 2009 5:15 pm ] |
| Post subject: | Re: whos got twinsticks? |
[quote="lump_a_charcoal"]You just need a new shift sheet - $6 from most spares places. X2 happend to mine last year $7 genuine problem solved.. And for that money , take spare.
|
|
| Author: | zookprojectfnq [ Mon Jun 08, 2009 6:18 pm ] |
| Post subject: | Re: whos got twinsticks? |
I just fitted the twin sticks from lockt up a week or so ago and yes you do have to split the case to remove the detent ball. This separates low/high shift shaft to the 2wd 4wd shafts. Its not a big job to do just take a bit of time and patience especially when bending the sticks and welding them on. Been out 4wdrivng all weekend and I have to say if you have a lockright in the front it makes it a breeze. You would be surprised where you get in 2wd low |
|
| Author: | foolsp33d [ Mon Jun 08, 2009 6:19 pm ] |
| Post subject: | Re: whos got twinsticks? |
http://www.zuksoffroad.net/samurai_tcase.htm bout 3/4 of the way down is the ''t-bra'' $12 US. made of brass.. if you do go this route, let me know and will xfer some funds and get ya to get two.. save on shipping.. i know my xfer is in need of one 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|