| auszookers.com https://auszookers.com/forum/ |
|
| Jimny ECU re-map https://auszookers.com/forum/viewtopic.php?f=5&t=50996 |
Page 1 of 1 |
| Author: | TEKNO [ Sat Sep 12, 2015 12:58 pm ] |
| Post subject: | Jimny ECU re-map |
Hiya all....I was wondering if anyone has had their standard Jimny ECU remapped/tuned and what were the outcomes of that? Also who did the tune? Tanku |
|
| Author: | watermouse [ Sun Sep 13, 2015 8:43 pm ] |
| Post subject: | Re: Jimny ECU re-map |
I am assuming you have read this thread: http://www.auszookers.com/forum/viewtopic.php?f=17&t=30308&start=330&hilit=reflash I would say that almost everyone who has visited this forum AND done an M18 swap has posted in that thread. If you search the thread there is one brief discussion about reflashing an ECU but no real info. It seems most people are not remapping/reflashing ECUs for this conversion. Rhinoman http://www.auszookers.com/forum/memberlist.php?mode=viewprofile&u=3386 is the guy to ask about ECU related stuff. He may or may not have experience reflasing M series ECUs. The other place to search is the Swift forums |
|
| Author: | TEKNO [ Mon Sep 14, 2015 9:23 am ] |
| Post subject: | Re: Jimny ECU re-map |
Awesome,thankyou,I will check it out and also send PM to Rhinoman. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|