| auszookers.com https://auszookers.com/forum/ |
|
| Vitara suspension https://auszookers.com/forum/viewtopic.php?f=5&t=51003 |
Page 1 of 1 |
| Author: | Bushy84 [ Sun Sep 13, 2015 6:15 pm ] |
| Post subject: | Vitara suspension |
Afternoon, done a search on here but couldn't find the info I was after. where are people getting there suspension parts from? ive done a search on the net but I'm not all that good on using the net... more interested in diff drop brackets and rear diff drop brackets then springs and shocks. |
|
| Author: | Reubs [ Sun Sep 13, 2015 11:03 pm ] |
| Post subject: | Re: Vitara suspension |
Bits4Vits |
|
| Author: | christover1 [ Mon Sep 14, 2015 6:27 am ] |
| Post subject: | Re: Vitara suspension |
Reubs wrote: Bits4Vits Me too. |
|
| Author: | Bushy84 [ Mon Sep 14, 2015 11:56 am ] |
| Post subject: | Re: Vitara suspension |
thanks guys |
|
| Author: | Bushy84 [ Mon Sep 14, 2015 12:06 pm ] |
| Post subject: | Re: Vitara suspension |
I got on to another bloke over the UK. I ordered a couple things but he didn't make diff drop brackets for the v6. thanks the help |
|
| Author: | V1tara [ Thu Sep 17, 2015 1:13 am ] |
| Post subject: | Re: Vitara suspension |
i got 2" lift kit from jimnybits.co.uk got it within 4 days (if i remember correct). |
|
| Author: | fordem [ Thu Sep 17, 2015 2:55 am ] |
| Post subject: | Re: Vitara suspension |
Rear diff drop brackets ?!? |
|
| Author: | Bushy84 [ Thu Sep 17, 2015 6:29 am ] |
| Post subject: | Re: Vitara suspension |
Meant spacer that sits bolts to top of the diff. |
|
| Author: | Gwagensteve [ Thu Sep 17, 2015 10:55 am ] |
| Post subject: | Re: Vitara suspension |
I wouldn't fit a diff spacer unless you had proven the shock lengths you are running make it necessary. They raise roll centre and reduce antisquat, neither of which is especially desirable. |
|
| Author: | Bushy84 [ Sun Sep 20, 2015 7:19 am ] |
| Post subject: | Re: Vitara suspension |
As shocks are 3 inches longer then standard I will be fitting one. But in saying that with the new shock brackets I may not need to fit it. Once I have the parts here I will be able to work out if needed or not, seeing its all coming from the UK it is easier to order it all now, then if it is not needed it can be sold on. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|