auszookers.com
https://auszookers.com/forum/

t case backlash knock and rear wheel bearings
https://auszookers.com/forum/viewtopic.php?f=5&t=5101		 Page 1 of 1
Author:  brendan [ Mon Jun 08, 2009 8:06 pm ]
Post subject:  t case backlash knock and rear wheel bearings
basicly as the tital says.

jacked the rear wheels of the ground and had the enigne running in gear. accelerating and backing off the tcase moves a bit and has a knock coming from the inside of it. i have herd of a few zooking doing it offroad when loaded up and then putting the clutch in backs a knock knock knock knock.
it has always done it but i would like ot know what cases it and if its a zook thing :D
my case had been fully rebuild by profesional. he put in new 6.1 gears, bearings ect

also ive got some movement from the drivers side rear wheel. guessing this is just the bearing on it way out. kind of sounds like a washing machine with nuts in it.
Author:  felix [ Mon Jun 08, 2009 9:49 pm ]
Post subject:  Re: t case backlash knock and rear wheel bearings
hey dude, the vit does that knock knock knock thing too I don't know if you heard it when we were out the other week...

If the rear wheel has movement in it and sounds like that I'd say the bearing has gone.. Replace it asap otherwise it'll be heaps gay to take off...
Author:  Saam [ Mon Jun 08, 2009 10:13 pm ]
Post subject:  Re: t case backlash knock and rear wheel bearings
they are always heaps gay to take off nomatter how stuffed they are lol
Author:  brendan [ Mon Jun 08, 2009 10:41 pm ]
Post subject:  Re: t case backlash knock and rear wheel bearings
Saam wrote:
they are always heaps gay to take off nomatter how stuffed they are lol


as you may know my tcase has a gay crack in it. so its going to get a new case. might get them to replace the gay wheel rear bearings too. ive read what you have to do and im just couldnt be bothered
Author:  felix [ Mon Jun 08, 2009 10:56 pm ]
Post subject:  Re: t case backlash knock and rear wheel bearings
Wheel bearing is easy dude, all you need to do is pull the axle and get a press :P
Author:  brendan [ Tue Jun 09, 2009 12:03 am ]
Post subject:  Re: t case backlash knock and rear wheel bearings
yer. might do it myself. my uncle is a machanic and has a press so might do it there.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/