| auszookers.com https://auszookers.com/forum/ |
|
| sierra clutches and flywheels https://auszookers.com/forum/viewtopic.php?f=5&t=5112 |
Page 1 of 1 |
| Author: | Mike [ Tue Jun 09, 2009 1:45 am ] |
| Post subject: | sierra clutches and flywheels |
i've read that there are 3 different sierra flywheels but did they use different ones for different models or did they just put what ever they had laying around at the suzuki factory in any model? cheers Mike |
|
| Author: | Rockhopper [ Tue Jun 09, 2009 10:58 am ] |
| Post subject: | Re: sierra clutches and flywheels |
well I enquired about a clutch at my local parts shop recently and was advised they have two differant types of clutches in them, and with just about everything else I've bought for it, there seem to be two differant types of part for it, so it would'nt suprise me. Don't know about 3 differant types of flywheel, but I reckon the 1298cc motor and the 1324cc motor would probably have differant flywheels. |
|
| Author: | Scrawny [ Tue Jun 09, 2009 11:23 am ] |
| Post subject: | Re: sierra clutches and flywheels |
There's a flat type and a recess stepped type flywheel. My WT has the stepped type, not sure which suits which model though. Being Suzuki there will be a mess of both in the change over years. |
|
| Author: | shep [ Tue Jun 09, 2009 1:04 pm ] |
| Post subject: | Re: sierra clutches and flywheels |
i think the main difference is the gearbox input spline. all the 1.3's that i have seen have the stepped flywheel and the larger spline count. all pre 90's though. |
|
| Author: | shep [ Tue Jun 09, 2009 1:06 pm ] |
| Post subject: | Re: sierra clutches and flywheels |
i had a 1298 and a 1324 flywheel's side by side a few weeks ago and could see no difference. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|