auszookers.com
https://auszookers.com/forum/

Grand vitara 5:12 gearing questions
https://auszookers.com/forum/viewtopic.php?f=5&t=51223		 Page 1 of 1
Author:  2000 gv [ Thu Oct 22, 2015 11:49 am ]
Post subject:  Grand vitara 5:12 gearing questions
I've found someon selling a complete front alloy housing and front cvs from a vit. It's from a 97 jlx g16b. Will that be 26 spline? If it's 22 spline will I still be able to use it?

Have also found a rear third member from a 95 jx g16a. Will that bolt straight to my rear housing?

All help is appreciated thanks :D
Author:  got_bar_work [ Thu Oct 22, 2015 12:02 pm ]
Post subject:  Re: Grand vitara 5:12 gearing questions
They should both bolt in. Are u getting it all put in a steel housing ?
Author:  2000 gv [ Thu Oct 22, 2015 12:09 pm ]
Post subject:  Re: Grand vitara 5:12 gearing questions
Yeah I'm getting the vit diff put into my steel housing but I'm just unsure if the front diff is 22 or 26 spline and if the 22 spline would work
Author:  got_bar_work [ Thu Oct 22, 2015 12:49 pm ]
Post subject:  Re: Grand vitara 5:12 gearing questions
It should be 26
Change over was mid 96 i think. Does it have the new shape dash
Author:  2000 gv [ Thu Oct 22, 2015 12:58 pm ]
Post subject:  Re: Grand vitara 5:12 gearing questions
The body's already been sent to the wreckers. He only has parts left but it was from a 97. I might see if he can count the splines for me
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/