| auszookers.com https://auszookers.com/forum/ |
|
| Bull bar for Jimny with stock suspension https://auszookers.com/forum/viewtopic.php?f=5&t=51360 |
Page 1 of 1 |
| Author: | spirro [ Sat Nov 14, 2015 1:18 pm ] |
| Post subject: | Bull bar for Jimny with stock suspension |
Hey guys on my 2015 Jimny I'm running 215/75r15 AT's on stock suspension and stock rims. I haven't experienced any scrubbing so far, but if I wanted to add a bull bar, is the extra weight going to cause scrubbing if I don't lift it? Any one running bigger tyres on stock suspension with a bull bar? I'm looking at the Outback Accessories commercial bar. Cheers 
|
|
| Author: | spirro [ Tue Nov 24, 2015 8:46 pm ] |
| Post subject: | Re: Bull bar for Jimny with stock suspension |
Can anyone assist with this query? Cheers |
|
| Author: | Gwagensteve [ Tue Nov 24, 2015 9:36 pm ] |
| Post subject: | Re: Bull bar for Jimny with stock suspension |
No. It won't. |
|
| Author: | vet 180 [ Tue Nov 24, 2015 11:13 pm ] |
| Post subject: | Re: Bull bar for Jimny with stock suspension |
No reason it should as if it's not rubbing now as it cycles through the suspension, even if it does sit lower with the bar it won't rub. Also the front bar is the limiting factor clearance wise on a jimny so you should in therory gain clearance |
|
| Author: | spirro [ Wed Nov 25, 2015 5:49 am ] |
| Post subject: | Re: Bull bar for Jimny with stock suspension |
That's great thanks guys |
|
| Author: | Jezza86 [ Wed Nov 25, 2015 8:33 am ] |
| Post subject: | Re: Bull bar for Jimny with stock suspension |
you will get worse fuel evonomy with a bullbar FYI. |
|
| Author: | buzbox [ Sat Dec 05, 2015 9:31 am ] |
| Post subject: | Re: Bull bar for Jimny with stock suspension |
225/75 Tyres The 2"lift in the front has sagged to 5mm above standard height, still no scrubbing with ARB steel bar with winch. 
|
|
| Author: | spirro [ Sat Dec 05, 2015 10:32 am ] |
| Post subject: | Bull bar for Jimny with stock suspension |
I wonder if it will sag too much with stock no lift and be too low Sent from my iPhone using Tapatalk |
|
| Author: | Kor3y101 [ Sun Dec 06, 2015 7:31 am ] |
| Post subject: | Re: Bull bar for Jimny with stock suspension |
You can always add coil spacers to get the height back if your worried about sag. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|