| auszookers.com https://auszookers.com/forum/ |
|
| Mi6 M18 Block Bearings https://auszookers.com/forum/viewtopic.php?f=5&t=51561 |
Page 1 of 1 |
| Author: | ALBYALBATROSS1 [ Wed Dec 16, 2015 6:00 pm ] |
| Post subject: | Mi6 M18 Block Bearings |
Hi All. I have a m1.8 to install in our Jimny. I want to rebuild this engine. It is ahrd to find the bearings. I want to know if the blocks and cams ect are the same across both engines except for the Bore? Or can anyone point me in the direction of a onlline microfice or similar of the engine components in exploded view. I have come up with nothing. Not sure why. Any help on this would be appreciated. |
|
| Author: | Jimny_No_Power [ Wed Dec 16, 2015 8:54 pm ] |
| Post subject: | Re: Mi6 M18 Block Bearings |
http://suzuki-cat.ru/?&action=group® ... 8&modif=02 Hope that helps, there are a few other resources around if you need to cross ref etc. Let me know of you get stuck. FYI, Australian models are referred to as E24 across the range, to the best of my knowledge . |
|
| Author: | Jimny_No_Power [ Wed Dec 16, 2015 9:34 pm ] |
| Post subject: | Re: Mi6 M18 Block Bearings |
Btw if you're doing a rebuild- I've use that first link to find part numbers and ordered from these guys with success.https://partsouq.com/en/catalog/suzuki/category?catalog=EU&model_code=RH416522 Matching bearings and part numbers seems to be a bit hit and miss imo, so I buy them locally as I go. BSC in Archerfield haven't failed me yet. |
|
| Author: | ALBYALBATROSS1 [ Thu Dec 17, 2015 1:19 am ] |
| Post subject: | Re: Mi6 M18 Block Bearings |
Thanks for that. I will dive right in and have a look. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|