| auszookers.com https://auszookers.com/forum/ |
|
| jack handle https://auszookers.com/forum/viewtopic.php?f=5&t=5168 |
Page 1 of 1 |
| Author: | beef13 [ Fri Jun 12, 2009 12:02 am ] |
| Post subject: | jack handle |
just quickly, does anyone know where the handle for the jack is located? i know the jack is under the bonnet (obviously) but dunno where the handle to raise/lower it is cheers |
|
| Author: | parfittron [ Fri Jun 12, 2009 12:08 am ] |
| Post subject: | Re: jack handle |
should be running across under the front of the drivers seat if i recall correctly. On the small panel above the footwell. |
|
| Author: | 31zook [ Fri Jun 12, 2009 12:08 am ] |
| Post subject: | Re: jack handle |
Should be infront of your drivers seat held in with two clips and a hole going into your sills... |
|
| Author: | Saam [ Fri Jun 12, 2009 1:25 am ] |
| Post subject: | Re: jack handle |
mine was missing i use a screw driver and my extreme muscles |
|
| Author: | Rockhopper [ Fri Jun 12, 2009 1:25 am ] |
| Post subject: | Re: jack handle |
I'm pretty sure mine is in the factory tool bag in the glovebox |
|
| Author: | scottysj80 [ Fri Jun 12, 2009 1:29 am ] |
| Post subject: | Re: jack handle |
Rockhopper wrote: I'm pretty sure mine is in the factory tool bag in the glovebox
what thay have a factory tool bag? mine didnt come with one and yes the jack handle is under the drivers seat at the front. cheers scott |
|
| Author: | Zook_Fan [ Fri Jun 12, 2009 1:33 am ] |
| Post subject: | Re: jack handle |
Saam wrote: mine was missing i use a screw driver and my extreme muscles
I've had to do that too. my muscles were extreme as well but we were questioned by three lots of coppers while swapping one flat. It takes forever. |
|
| Author: | Rockhopper [ Fri Jun 12, 2009 2:03 am ] |
| Post subject: | Re: jack handle |
scottysj80 wrote: Rockhopper wrote: I'm pretty sure mine is in the factory tool bag in the glovebox what thay have a factory tool bag? mine didnt come with one and yes the jack handle is under the drivers seat at the front. cheers scott yes they have a factory toolkit comprising of a bag, 10 x 12 open end spanner, 14 x 17 open end spanner. combination screwdriver and handle, slip joint pliers, spark plug socket wrench and a wheel wrench. My mistake also, as Scott already mentioned and according to my owners manual oh, and WOOHOO, 400 posts!! |
|
| Author: | Saam [ Fri Jun 12, 2009 2:12 am ] |
| Post subject: | Re: jack handle |
my toolbag was eaten by pigmies |
|
| Author: | scottysj80 [ Fri Jun 12, 2009 2:38 am ] |
| Post subject: | Re: jack handle |
well i got ripped of my car didnt even come with a wheal brace let alone a tool bag lol but it dose have a jack and jack handle cheers scott |
|
| Author: | Mike [ Fri Jun 12, 2009 2:39 am ] |
| Post subject: | Re: jack handle |
i wish i had a jack handle and bonnet holding open stick none of my zooks have had either |
|
| Author: | royce [ Fri Jun 12, 2009 2:42 am ] |
| Post subject: | Re: jack handle |
the bonnet stick was the best bit of my silver sierra, then Bruce stole it!!!!!!!!!!!!!!! |
|
| Author: | just_cruizin [ Fri Jun 12, 2009 2:57 am ] |
| Post subject: | Re: jack handle |
only pussies with snorkles use them and how many sierra's really need a snorkle. |
|
| Author: | Mike [ Fri Jun 12, 2009 3:39 am ] |
| Post subject: | Re: jack handle |
mine needs a snorkel ladies love snorkels |
|
| Author: | Bruce [ Fri Jun 12, 2009 1:53 pm ] |
| Post subject: | Re: jack handle |
royce wrote: the bonnet stick was the best bit of my silver sierra, then Bruce stole it!!!!!!!!!!!!!!!
That makes up for the Clutch cable you stole off me last month |
|
| Author: | Scrawny [ Fri Jun 12, 2009 1:56 pm ] |
| Post subject: | Re: jack handle |
Mike wrote: mine needs a snorkel ladies love snorkels
x2!! Real chick magnets!! I don't bother using my bonnet stay though.... |
|
| Author: | shep [ Fri Jun 12, 2009 1:59 pm ] |
| Post subject: | Re: jack handle |
my 89 sierra came with a log book that was stamped every 5000ks by a suzuki dealer. 280000ks worth of factory servicing |
|
| Author: | Scrawny [ Fri Jun 12, 2009 2:01 pm ] |
| Post subject: | Re: jack handle |
Damn!!! How many dealer stamps since then??? |
|
| Author: | royce [ Fri Jun 12, 2009 2:01 pm ] |
| Post subject: | Re: jack handle |
I gave it back!!! |
|
| Author: | Zook_Fan [ Fri Jun 12, 2009 4:38 pm ] |
| Post subject: | Re: jack handle |
I got a bonnet stay, it is sitting in the shed. There is no point for them, the bonnet sits against the windscreen and there is way more visability. |
|
| Author: | hutch [ Fri Jun 12, 2009 9:55 pm ] |
| Post subject: | Re: jack handle |
Saam wrote: my toolbag was eaten by pigmies
yeeeaa! "n it was narce too bro! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|