| auszookers.com https://auszookers.com/forum/ |
|
| G16b https://auszookers.com/forum/viewtopic.php?f=5&t=51707 |
Page 1 of 1 |
| Author: | jeddog01 [ Mon Jan 11, 2016 7:51 am ] |
| Post subject: | G16b |
Thinking of fitting a G16b engine from a baleno into my jimny and just wondering apart from the adapator kit what other mods need to be done ... cheers |
|
| Author: | Gwagensteve [ Mon Jan 11, 2016 8:05 am ] |
| Post subject: | Re: G16b |
Tried a search? I think there might be a couple of threads about this in the good tech section. See what you can find |
|
| Author: | GraphicX [ Mon Jan 11, 2016 6:36 pm ] |
| Post subject: | Re: G16b |
as steve said do a search, tons of info on it & if you aren't willing to research it a bit you probably shouldn't undertake it. short list; - cam ring or cam will need to be swapped - brackets will need to be cut &/or ground & drilled - injectors will need to be swapped - longer belt & some hoses used - oil pick up cut & welded - possibly drill & tap a crank bearing cap probably a lot of other little things i can't recall. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|