| auszookers.com https://auszookers.com/forum/ |
|
| Baleno starter to sierra https://auszookers.com/forum/viewtopic.php?f=5&t=51716 |
Page 1 of 1 |
| Author: | jonno_racing [ Tue Jan 12, 2016 9:08 am ] |
| Post subject: | Baleno starter to sierra |
Hey all. I have 2x baleno starter motors here, both have the bolt holes off center, 2 high if you will. And sierra is central? However listings online say the thin starter will work with both?? Any clues? Phil |
|
| Author: | MrRocky [ Tue Jan 12, 2016 9:34 am ] |
| Post subject: | Re: Baleno starter to sierra |
New starters are smaller and cover a variety of g series motors but older ones are more specific. Many ebay ones now suit g16b to sierra box but keep in mind they can still be listed wrong |
|
| Author: | Blkfxx [ Tue Jan 12, 2016 10:24 am ] |
| Post subject: | Re: Baleno starter to sierra |
Baleno starter is different to sierra, I tried it when I put my G16B in. |
|
| Author: | jonno_racing [ Tue Jan 12, 2016 11:28 am ] |
| Post subject: | Re: Baleno starter to sierra |
Yeah the baleno are the narrow type. I may have a thin one here.. potential swap the internals? |
|
| Author: | jonno_racing [ Tue Jan 12, 2016 11:29 am ] |
| Post subject: | Re: Baleno starter to sierra |
Juat has me stuffed as there is so many listings |
|
| Author: | MrRocky [ Tue Jan 12, 2016 11:52 am ] |
| Post subject: | Re: Baleno starter to sierra |
U used 1ltr internals in my 1.6 ebay starter after it died first trip. 50,000km on 1ltr internals haha. They have to be same brand to swap the guts out |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|