auszookers.com
https://auszookers.com/forum/

ebay head gasket kits
https://auszookers.com/forum/viewtopic.php?f=5&t=51844
Page 1 of 1

Author:  craigtempo [ Tue Feb 02, 2016 7:17 pm ]
Post subject:  ebay head gasket kits

Need a head gasket kit.....ebay ones seem cheap ...what are the like? Any good ? G13a engine

Author:  4x4xzook [ Wed Feb 03, 2016 8:52 am ]
Post subject:  Re: ebay head gasket kits

i would advise againt it.
your local repco will have one, at a reasonable price. I think mine was about $8

Author:  AckerDackerly [ Wed Feb 03, 2016 11:22 am ]
Post subject:  Re: ebay head gasket kits

Be careful when installing it. it can fit two ways - the wrong way will block off an oil passage feeding to the head

Author:  craigtempo [ Wed Feb 03, 2016 9:25 pm ]
Post subject:  Re: ebay head gasket kits

4x4xzook wrote:
i would advise againt it.
your local repco will have one, at a reasonable price. I think mine was about $8

$8 Seems a bit cheap ....im talking a head gasket kit so its ..head gasket ...both manifold gaskets and tge rocker cover gasket.

Author:  jdk81 [ Wed Feb 03, 2016 10:51 pm ]
Post subject:  Re: ebay head gasket kits

Was probably a typo.
Id be expecting $80.

Author:  4x4xzook [ Thu Feb 04, 2016 6:38 am ]
Post subject:  Re: ebay head gasket kits

im good with typo's haha.
Have you called an auto store to price it up?

Author:  jdk81 [ Thu Feb 04, 2016 6:47 am ]
Post subject:  Re: ebay head gasket kits

I have had similar experiences with ebay valve regrind sets (VRS) and ones sourced from repco, and I've tried a few headgaskets from suziworld.

I have found they all required a retorque, which isn't such an issue in an 8v engine, but sucks in the 16v, as the cam shaft needs to come out.
Besides that, no other problems.

Author:  craigtempo [ Thu Feb 04, 2016 6:30 pm ]
Post subject:  Re: ebay head gasket kits

Yeah illook at the shops tomorrow....ebay cheapest is $59

Author:  jonno_racing [ Sun Feb 07, 2016 8:52 pm ]
Post subject:  Re: ebay head gasket kits

Always use brand name heagaskets or genuine.
I stick with velpro gaskets and spray on holamar (sp)

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/