stekky's first posts are all about this.
viewtopic.php?f=5&t=4947i <3 the sirch.
| auszookers.com https://auszookers.com/forum/ |
|
| GV transfer issues https://auszookers.com/forum/viewtopic.php?f=5&t=52243 |
Page 1 of 1 |
| Author: | Built4thrashing [ Sat Apr 02, 2016 3:33 pm ] |
| Post subject: | GV transfer issues |
I can't remember if there was a recall or not but was there an issue with the transfers in the first gen Grand Vitaras? |
|
| Author: | gregwatkins75 [ Sat Apr 02, 2016 3:37 pm ] |
| Post subject: | Re: GV transfer issues |
Wasn't it the very first, earlier ones that had an issue with the chain? Or something to do with the drive? |
|
| Author: | Built4thrashing [ Sat Apr 02, 2016 3:48 pm ] |
| Post subject: | Re: GV transfer issues |
I believe it was the front output drive.... but cant be certain. If anyone has the part number for the replacement bits please post it.... ive got another t/case causing me problems. Skipping drive to the front wheels |
|
| Author: | atari4x4 [ Sat Apr 02, 2016 3:55 pm ] |
| Post subject: | Re: GV transfer issues |
stekky's first posts are all about this. viewtopic.php?f=5&t=4947i <3 the sirch. |
|
| Author: | Built4thrashing [ Sat Apr 02, 2016 4:11 pm ] |
| Post subject: | Re: GV transfer issues |
not sure if thats the same problem im having but cheers. Mine doesnt jump out or 4wd completely.... it seems to slip drive to the front and make horrible banging noises when it does. At first i thought it was the locker but now im not so sure.. |
|
| Author: | atari4x4 [ Sat Apr 02, 2016 10:56 pm ] |
| Post subject: | Re: GV transfer issues |
didn't you have a similar issue a few year back? |
|
| Author: | fordem [ Sun Apr 03, 2016 6:37 am ] |
| Post subject: | Re: GV transfer issues |
There were two different 4WD related issues with the early SQ series - one was the freewheel clutch in the front differential slipping, and the second was the transfer case jumping from 4H back to 2H. |
|
| Author: | Built4thrashing [ Mon Apr 04, 2016 4:49 pm ] |
| Post subject: | Re: GV transfer issues |
atari4x4 wrote: didn't you have a similar issue a few year back? Yes i did. that was worn out bearings in the case allowing the input shaft in the transfer to flex and skip drive. I replaced the transfer and problem was solved. Im having similar issues again but haven't had time to look into it.... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|