| auszookers.com https://auszookers.com/forum/ |
|
| Bump stops https://auszookers.com/forum/viewtopic.php?f=5&t=52251 |
Page 1 of 1 |
| Author: | frak [ Sun Apr 03, 2016 10:47 pm ] |
| Post subject: | Bump stops |
Can somebody tell me how to work out the additional bump stop length i need in the back for a lwb vit running 30" tires? Ie to stop hitting the outside guards. Not sure given compression on them via the tapers. |
|
| Author: | Red89 [ Mon Apr 04, 2016 6:06 am ] |
| Post subject: | Re: Bump stops |
Flex it up till they just start to make contact, measure the gap between the current bumpstop and contact point on the diff add an extra 20ish mm and that's the rough length you need |
|
| Author: | J--A--C--K [ Mon Apr 04, 2016 4:47 pm ] |
| Post subject: | Re: Bump stops |
If your hitting the outside of the guard maybe your rim offset is a bit much , I thought 30's tucked pretty well on the vits |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|