auszookers.com
https://auszookers.com/forum/

M18A Extractors?
https://auszookers.com/forum/viewtopic.php?f=5&t=52405		 Page 1 of 1
Author:  Hoogz [ Sat Apr 30, 2016 3:11 pm ]
Post subject:  M18A Extractors?
I'm thinking about putting an M18A in my 2007 Jimny and was curious about extractors. Would I be looking fro extractors to suit the M13A (Jimny) or M18A (Liana)?

Does anyone have a link for a good set of extractors that would be suitable for the M18A in the Jimny? I have heard RedBack mentioned...


Cheers
Author:  TEKNO [ Sun May 01, 2016 5:14 pm ]
Post subject:  Re: M18A Extractors?
I have a M18A in my 2012 jim and I got them to suit the M13A because the exhaust ports are the same size and mine are Wildcat headers from fleabay and I got them for $240 about a year ago, they fit very well.
Author:  Hoogz [ Sun May 01, 2016 6:30 pm ]
Post subject:  Re: M18A Extractors?
Cheers Tenko ;-)

Did you have any dramas getting the M18A engineered in the later model Jimny? (if it was required ;-) )
Author:  TEKNO [ Sun May 01, 2016 9:34 pm ]
Post subject:  Re: M18A Extractors?
Nah not here in SA,I had to apply in writing or via email to regency and after 5 weeks they got back to me and said go for it but I had to have an inspection afterwards and she passed without a problem,it was quite painless actually.
Author:  20zook15 [ Wed May 04, 2016 8:27 am ]
Post subject:  Re: M18A Extractors?
Has anyone had any issues installing extractors on a jimny with the cat in the manifold?

I have a 2015 jimny and have had mixed responses from different exhaust shops.
Author:  Jezza86 [ Wed May 04, 2016 3:24 pm ]
Post subject:  Re: M18A Extractors?
if the o2 sensor is mounted too far out of the exhaust flow you can run rich or lean. happens on the Chinese extractors http://www.aliexpress.com/store/product ... 55576.html
gotta grind down the O2 sensor flange to get the sensor in a bit further
Author:  20zook15 [ Sun May 15, 2016 3:56 pm ]
Post subject:  Re: M18A Extractors?
I have a set for sale if anyone is interested. In the for sale section..
Author:  TEKNO [ Sun May 15, 2016 5:37 pm ]
Post subject:  Re: M18A Extractors?
So why cant they be installed onto your Jimny??? I had a look and they are the same ones I also bought and for my 2012 jim and they are great,I dont see there being much difference from my model to yours,mine is the facelift model also...please explain :roll:
Author:  20zook15 [ Sun May 15, 2016 6:20 pm ]
Post subject:  Re: M18A Extractors?
Mine has a Cat in the manifold which I have been told won't work by multiple exhaust places now. Seems they are all good up till 2012. After that it is an issue!
Author:  TEKNO [ Sun May 15, 2016 7:31 pm ]
Post subject:  Re: M18A Extractors?
Yes mine also had a cat in the standard manifold, I went to Midas and they did it for me but I also went to a few different places before I found an exhaust shop that would do it for me,persevere mate you may just find someone who will do it for you
Author:  TEKNO [ Sun May 15, 2016 7:33 pm ]
Post subject:  Re: M18A Extractors?
I seriously doubt there is any difference between your standard manifold and the manifold I had,both are pre cat manifolds,quite common but not needed
Author:  20zook15 [ Sun May 15, 2016 8:56 pm ]
Post subject:  Re: M18A Extractors?
I will have had a look around but it seems that the 2012 didn't have a cat in the manifold. Unless someone has some hard proof for the 2013 + extractors I am not going to be the guinie pig!
Author:  TEKNO [ Sun May 15, 2016 9:26 pm ]
Post subject:  Re: M18A Extractors?
I actually saw the cat in my manifold when it was taken off the car so I can verify that mine did indeed have a manifold cat as well. I hope this helps
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/