| auszookers.com https://auszookers.com/forum/ |
|
| Vitara 4.24 Reduction Gears noisy https://auszookers.com/forum/viewtopic.php?f=5&t=52487 |
Page 1 of 1 |
| Author: | FullyZooked [ Mon May 16, 2016 10:24 am ] |
| Post subject: | Vitara 4.24 Reduction Gears noisy |
Hey guys, I've had my 4.24 rock monster gears fitted for over 2 years now and they have been amazing. Only recently has low range started making a gear noise. It's not the typical whirring of the reduction but a gear Mesh noise. You can hear as each tooth on a gear meshing the other gear like a tug tug tug tug and increases with speed but is more noticeable and loud in 2nd and 3rd low range. Straight away I dropped the oil for a change out and notice the oil was very metallic and shiny aswell as a single ball bearing sitting on the sump plug!!! Any advice appreciated! |
|
| Author: | Gwagensteve [ Mon May 16, 2016 10:40 am ] |
| Post subject: | Re: Vitara 4.24 Reduction Gears noisy |
Time for a rebuild. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|