auszookers.com https://auszookers.com/forum/
Sierra/m-series hybrid box https://auszookers.com/forum/viewtopic.php?f=5&t=52544	Page 1 of 1

---

Author:	MrRocky [ Wed May 25, 2016 10:35 pm ]
Post subject:	Sierra/m-series hybrid box
I know its possible just wondering if anyone has any info on building a sierra/mseries box to use behind a m series motor in a sierra. Im led to believe you need to use parts from a vvt, non-vvt and sierra box ???

---

Author:	alien [ Wed May 25, 2016 10:38 pm ]
Post subject:	Re: Sierra/m-series hybrid box
I asked Brian about this a while back when i was looking at doing the head gasket on my g16. I was weighing up going m15 instead. Cost was my deciding factor in fixing the G motor... But Brian has done it with 2 or 3 other cars i believe??

---

Author:	MrRocky [ Wed May 25, 2016 10:42 pm ]
Post subject:	Re: Sierra/m-series hybrid box
Hes only done the one i know of, keeps the how to pretty closely guarded. I know nick who owns the m15 car they built quite well but big ask to pull his box apart to figure out whats going on

---

Author:	MrRocky [ Wed May 25, 2016 10:43 pm ]
Post subject:	Re: Sierra/m-series hybrid box
M18 is appealing

---

Author:	alien [ Thu May 26, 2016 12:55 pm ]
Post subject:	Re: Sierra/m-series hybrid box
M18 is VERY appealing, but M15 are way more prevalent (cheaper) and still more power than g16.

---

Author:	MrRocky [ Thu May 26, 2016 1:04 pm ]
Post subject:	Re: Sierra/m-series hybrid box
M15 might have more power on paper but the torque dilivery makes them drive slower. Side by side g16 wins easy

---

Author:	atari4x4 [ Thu May 26, 2016 1:24 pm ]
Post subject:	Re: Sierra/m-series hybrid box
Darren has some tech on the Sierra M series GBox here: viewtopic.php?f=5&t=13515

---

Author:	MrRocky [ Thu May 26, 2016 2:08 pm ]
Post subject:	Re: Sierra/m-series hybrid box
Perfect cheers

---

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/