auszookers.com
https://auszookers.com/forum/

Will my 1.3WT SWB TCase, bolt up to my 1.3NT LWB shafts
https://auszookers.com/forum/viewtopic.php?f=5&t=5256		 Page 1 of 1
Author:  31zook [ Wed Jun 17, 2009 9:38 pm ]
Post subject:  Will my 1.3WT SWB TCase, bolt up to my 1.3NT LWB shafts
So hit me with it... :wink:
Author:  Zook_Fan [ Wed Jun 17, 2009 10:06 pm ]
Post subject:  Re: Will my 1.3WT SWB TCase, bolt up to my 1.3NT LWB shafts
nope, you will need to change the flanges on the transfer and you will also need to adapt the NT handbrake onto the back of the WT one.
Author:  shep [ Wed Jun 17, 2009 10:08 pm ]
Post subject:  Re: Will my 1.3WT SWB TCase, bolt up to my 1.3NT LWB shafts
the hand brake will bolt on but you will need to do something about the flanges.
Author:  Zook_Fan [ Wed Jun 17, 2009 10:11 pm ]
Post subject:  Re: Will my 1.3WT SWB TCase, bolt up to my 1.3NT LWB shafts
the flanges will bolt on aswell. the shafts are the same size, just undo the flange nuts, swap flanges, put NEW nuts on.
Author:  shep [ Wed Jun 17, 2009 10:22 pm ]
Post subject:  Re: Will my 1.3WT SWB TCase, bolt up to my 1.3NT LWB shafts
Zook_Fan wrote:
the flanges will bolt on aswell. the shafts are the same size, just undo the flange nuts, swap flanges, put NEW nuts on.


LOL if only it is as easy as saying. even with a BFO rattle gun they can fight back. :wink:
Author:  Zook_Fan [ Wed Jun 17, 2009 10:26 pm ]
Post subject:  Re: Will my 1.3WT SWB TCase, bolt up to my 1.3NT LWB shafts
yeah i know, an oxy helps ;)
Author:  31zook [ Thu Jun 18, 2009 2:02 am ]
Post subject:  Re: Will my 1.3WT SWB TCase, bolt up to my 1.3NT LWB shafts
Cool so the flange splins must be the same? Um to undo mine we left the input shaft done up and got out a braker bar and gave it a tug. Then we just put a rear one on and put it up against a wall then undid the input... But on a GU pootrol we had to start the car to get the nuts to crack...efort
Author:  Zook_Fan [ Thu Jun 18, 2009 2:10 am ]
Post subject:  Re: Will my 1.3WT SWB TCase, bolt up to my 1.3NT LWB shafts
flange spline count and size are exactly the same ;)
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/