auszookers.com
https://auszookers.com/forum/

egc31s Baleno Manual.
https://auszookers.com/forum/viewtopic.php?f=5&t=52632		 Page 1 of 1
Author:  rexhunta [ Mon Jun 13, 2016 7:21 am ]
Post subject:  egc31s Baleno Manual.
Hey guys,

I'm chasing knowledge or a service manual for EGC31S Baleno. Is it the same pin outs on the ECU as the pack over plug coils or completely different with the stand alone coils please?

Thanks.

Pete.
Author:  MrRocky [ Mon Jun 13, 2016 8:20 am ]
Post subject:  Re: egc31s Baleno Manual.
There are 3 -4 different pinout configurations within the baleno coilpack family of motors
Author:  rexhunta [ Mon Jun 13, 2016 2:25 pm ]
Post subject:  Re: egc31s Baleno Manual.
Ok, so I've got one of the manuals at home, I should roughly be close to where I need to be? I'll trace it back. That's good then. Thanks for that Michael.

Pete.
Author:  MrRocky [ Mon Jun 13, 2016 6:26 pm ]
Post subject:  Re: egc31s Baleno Manual.
There is only 2 igniton, 2 earths and fuel pump wire need connecting
Author:  rexhunta [ Mon Jun 13, 2016 6:49 pm ]
Post subject:  Re: egc31s Baleno Manual.
Yeah i've done a few Vitara ones now, I'm just hoping the Baleno diagram I have already will be close enough to the one we have.

I've got a 4 coilpack one which i'm hoping is not too distant to the coil on plug.
Author:  MrRocky [ Mon Jun 13, 2016 7:41 pm ]
Post subject:  Re: egc31s Baleno Manual.
U mean with a distributor ???
Author:  rexhunta [ Mon Jun 13, 2016 7:47 pm ]
Post subject:  Re: egc31s Baleno Manual.
No distributor.

The coilpacks are at the end of the head, which will be moved to another location when it's in the Sierra.
Author:  MrRocky [ Mon Jun 13, 2016 7:54 pm ]
Post subject:  Re: egc31s Baleno Manual.
Got a pic at all ?
Author:  rexhunta [ Mon Jun 13, 2016 8:30 pm ]
Post subject:  Re: egc31s Baleno Manual.
Image

coilpacks are mounted at the rear, which i'm happier about as i can get them away from the heatsoak in the sierra.
Author:  MrRocky [ Mon Jun 13, 2016 8:41 pm ]
Post subject:  Re: egc31s Baleno Manual.
Wow thats unusual, im guessing an import.
Is it a 1.5 or a 1.6 ? Never even seen that vairiant in wa
Author:  rexhunta [ Mon Jun 13, 2016 8:51 pm ]
Post subject:  Re: egc31s Baleno Manual.
all badging has g16b, compliance etc.

Engine number stamped on block is G16B-235207
Author:  MrRocky [ Mon Jun 13, 2016 9:20 pm ]
Post subject:  Re: egc31s Baleno Manual.
Can u take a pic of the ecu sticker
Author:  rexhunta [ Mon Jun 13, 2016 9:28 pm ]
Post subject:  Re: egc31s Baleno Manual.
Image

Behind glovebox is that's anything different. it's a 1998 Baleno Mystique.

Has 1 daffodil sticker.
Author:  jdk81 [ Tue Jun 14, 2016 8:20 am ]
Post subject:  Re: egc31s Baleno Manual.
AHUH!
There's your problem!

You are missing a daffodil sticker

Just hack out what you dont need, and transplant the rest.
Keep all the loom for reference and you will know where they all go and which ones are needed.
Author:  jono165 [ Tue Jun 14, 2016 10:35 am ]
Post subject:  Re: egc31s Baleno Manual.
Not unusual. There's 3 different baleno motors. Distributor at back of head, coil pack on back of head, and the coil on plug style which has the coil packs on the valve cover.
Author:  MrRocky [ Tue Jun 14, 2016 10:52 am ]
Post subject:  Re: egc31s Baleno Manual.
These are the ecu i normally do the looms for
Im gunna say the coil at rear of head configuration would be less than 15% in balenos at least in west oz.
As long as you have the correct pinouts then you cant go wrong

Image

Image
Author:  rexhunta [ Tue Jun 14, 2016 11:58 am ]
Post subject:  Re: egc31s Baleno Manual.
Cheers guys. Yeah I'll go through it on the weekend and start pulling out the harness and have a look. Got the Vitara ones down pat and I've written down the special pinouts, I've found 1 baleno pinouts so I'll just go from there.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/