| auszookers.com https://auszookers.com/forum/ |
|
| SJ xfer into Jimny https://auszookers.com/forum/viewtopic.php?f=5&t=52843 |
Page 1 of 1 |
| Author: | DS-ZOOK [ Tue Jul 19, 2016 12:34 pm ] |
| Post subject: | SJ xfer into Jimny |
Just wondering exactly which shafts I can use I know I need the intermediate and front drive But do I need specific sj70 or 80 and does it need to be WT or NT etc Cheers |
|
| Author: | Gwagensteve [ Tue Jul 19, 2016 1:14 pm ] |
| Post subject: | Re: SJ xfer into Jimny |
WT (sj70) will be the easiest for you to work with. |
|
| Author: | tanshi [ Tue Jul 19, 2016 3:44 pm ] |
| Post subject: | Re: SJ xfer into Jimny |
I know its the jack shaft and the rear tail shaft definitely. it might also be the front tail shaft. what kit are you using to fit it? |
|
| Author: | DS-ZOOK [ Wed Jul 20, 2016 8:12 am ] |
| Post subject: | Re: SJ xfer into Jimny |
I'm still waiting on using yours Well if you're replicating any of the previous made ones you should only need the front shaft (used on the rear of the Jimny) and the intermediate shaft Gwagen, would it be fine coming out of an sj80 WT? I'm not afraid of drilling and tapping or drilling and using bolts for the flanges etc |
|
| Author: | tanshi [ Wed Jul 20, 2016 8:54 am ] |
| Post subject: | Re: SJ xfer into Jimny |
sj80 case is a different size, shape and gearing, its also chain driven. |
|
| Author: | DS-ZOOK [ Wed Jul 20, 2016 12:12 pm ] |
| Post subject: | Re: SJ xfer into Jimny |
Yeah I already have a SJ70 case which I have put 6.5:1s in After some help on the FB page I have been told the sj80 shafts are different lengths.. looks like I'm still after some shafts then Cheers |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|